170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Cisco Systems, Inc.
Corporate Headquarters
Tel:
800 553-NETS (6387)
408 526-4000
Fax: 408 526-4100
WAN CiscoView for the MGX 8220
Release 2.0
January 2000
Customer Order Number: DOC-40328=
Text Part Number: 78-6543-02
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT
NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT
ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR
THEIR APPLICATION OF ANY PRODUCTS
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE
INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU
ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A
COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as
part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE
PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR

Document Conventions
xx
Related Documentation
xxiii
CHAPTER

1
Product Overvie
1-1
General Description
1-1
Starting CiscoView and Displaying a Dev i c
1-1
Understanding the Displa
1-2
Printing a Displa
1-3
Changing CiscoView Operating Characteristi c
1-3
Organizing Management Informat i o
1-4
Categorizing Informati o
1-5
Displaying Configuration Informati o
1-5
Displaying Performance Informati o
1-5
Selecting a Car
1-5
Selecting a Line or P o r


Contents
iv
WAN CiscoView for the MGX 822
Release 2.0, January 2000
CHAPTER

3
Configuring ASC Card
3-1
Selecting the Card and Displaying Card Paramet e r
3-1
ASC Card Configuration Dial o
3-1
ASC Features
3-3
Disk Diagnostic
3-3
CHAPTER

4
Configuring 4-Port Cards
4-1
Selecting the Card and Displaying Card Paramet e r
4-1
Card Configuration Dialo
4-1
Service Module Featur e
4-3
ATM Port RealTime Counters

Ports
5-6
Channel
5-9
CHAPTER

6
Configuring FRSM 2CT3 Cards
6-1
Displaying Card Paramete r
6-1
FRSM-2CT3 Card Configuration Dia l o
6-1
Service Module Featur e
6-3
FR Port Realtime Counters
6-4
LCN Partition Ty p
6-7
Ports
6-8
Channel
6-10

Contents
v
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Card/Channels (FR
6-10

Logical Ports (Service Queue
6-39
CHAPTER

7
Configuring FRSM-2T3/E3 Cards
7-1
Displaying Card Paramete r
7-1
FRSM-2T3/E3 Card Configuration Di a l o
7-1
FRSM-2T3/E3 Service Module Feature
7-3
FR Port Realtime Counters
7-4
LCN Partition Ty p
7-7
Ports
7-8
Channel
7-10
Card/Channels (FR
7-10
Card/Channels State Info (FR
7-15
Lines Configuration
7-16
dsx3 Lines Configuratio
7-16
Physical Line Configuration (dsx3

8-1
FRSM Service Module Feature
8-3
FR Port RealTime Counter
8-4
Lines
8-6
Ports
8-9
Channel
8-12
CHAPTER

9
Configuring FRSM-HS1 Cards
9-1
Selecting the Card and Displaying Card Paramet e r
9-1
FRSM-HS1 Port Card Configuration Dialo
9-1
FRSM-HS1 Service Module Feature
9-3
FR Port RealTime Counter
9-3
Ports
9-6
Channel
9-7
CHAPTER


10-2

Contents
vii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
FR Port Resource Partition Conf i
10-2
CHAPTER

11
Configuring FRSM-HS2 Cards
11-1
Selecting the Card and Displaying Card Paramet e r
11-1
FRSM-HS2 Card Configuration Dial o
11-1
FRSM-HS2 Service Module Feature
11-
FR Port RealTime Counter
11-4
Lines
11-6
Ports
11-8
CHAPTER

12
Configuring IMATM Cards
12-1

13-1
Card/Ports (ATM)
13-1
Card/Ports (Forum Compliant IMA Groups)
13-1
Channel
13-1
CHAPTER

14
Configuring BNM-T3/E3 Cards
14-1
Selecting the Card and Displaying Card Paramet e r
14-1
BNM-T3/E3 Card Configuration Dia l o
14-2
Lines
14-3

Contents
viii
WAN CiscoView for the MGX 822
Release 2.0, January 2000
CHAPTER

15
Configuring BNM-155 Cards
15-1
Selecting the Card and Displaying Card Paramet e r
15-1

DSX1 PLCP Configuration
17-6
DSX3 Lines Configuratio
17-6
Physical Line Configuration (dsx3)
17-
DSX3 Physical Line Alarm Configuratio
17-8
DSX3 Counters
17-1
DSX3 PLCP Alarm Configuration
17-12
Channelized Line Configurati o
17-1
Channelized Line Configuration (DSX1
17-1
Channelized Line Configuration (DSX3
17-1
X21 Lines Configuration Dial o g
17-16
X21 Line Config
17-17
X21 Physical Line Alarm Configurati o
17-1
Sonet Lines Configura t i o
17-1
Physical Line Config (Sonet)
17-1
Physical Line Alarm Config (Sonet
17-2

17-2
CHAPTER

18
Monitoring Li n e
18-1
Selecting a Lin
18-1
Monitoring DSX1 Counte r
18-1
Monitoring DSX3 Counte r
18-3
Monitoring DSX3 PLCP Count e r
18-6
Monitoring Logical Port
18-
FR Port Monitor (RCV) Counter
18-
FR Port Monitor (XMT) Counte r
18-8
FR Port Monitor (ILMI/CLLM) Count e r
18-
ATM-ILMI Port RealTime Counters
18-1
ATM RealTime Counters
18-10
Channel Monitorin
18-1
FRSM Channel Counters (R C V
18-1

Figure 2-2 Redundancy Info Dialog
2-3
Figure 2-3 Create Dialog
2-5
Figure 2-4 LAN Interface Info Dialog
2-6
Figure 2-5 Serial Interface Info Dialog
2-8
Figure 2-6 Front Card Info Table
2-11
Figure 4-1 Service Module Features
4-3
Figure 4-2 ATM Port RealTime Counters Configuration
4-4
Figure 4-3 Lines Dialog (dsx1)
4-6
Figure 4-4 Card/Ports (FR) Dialog
4-9
Figure 4-5 Card/Ports (ATM) Dialo
4-11
Figure 4-6 Channels Table
4-14
Figure 4-7 FRSM Channels Dialog
4-16
Figure 4-8 AUSM Channels Dialog
4-19
Figure 5-1 CESM Service Module Features
5-3
Figure 5-2 Lines Dialog (dsx1)
5-4

Release 2.0, January 2000
Figure 6-12 Channelized Line Alarm Config (dsx1) Dialog
6-25
Figure 6-13 Channelized Line RealTime Counters (dsx1) Dialog
6-30
Figure 6-14 Logical Port Config (FR) Dialog
6-31
Figure 6-15 FR Port RTCs Dialog
6-34
Figure 6-16 FR Port RTCs (CLLM) Dialog
6-37
Figure 6-17 FR Port Resource Partition Config Dialog
6-38
Figure 6-18 Logical Ports (Service Queue) Dialog
6-39
Figure 7-1 Card Configuration Dialog
7-2
Figure 7-2 FRSM-2T3/E3 Service Module Features Dialog
7-3
Figure 7-3 FR Port Realtime Counters Table
7-4
Figure 7-4 LCN Partition Type Dialog
7-7
Figure 7-5 FRSM-2T3/E3 Ports Dialog
7-8
Figure 7-6 FRSM-2T3/E3 Channels Dialo
7-10
Figure 7-7 Physical Line Config (dsx3) Dialog
7-17
Figure 7-8 Physical Line Alarm Config (dsx3) Dialog

9-6
Figure 9-4 FRSM-HS1 Channels Dialog
9-7
Figure 10-1 Card Configuration Dialog
10-2
Figure 10-2 Service Module Features Dialog
10-4
Figure 10-3 FR Port Realtime Counters Table
10-4
Figure 10-4 LCN Partition Type Dialog
10-7

Figures
xiii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Figure 10-5 Card/Ports (X.21/V.35) Dialog
10-8
Figure 10-6 Card/Channels Config Dialog
10-9
Figure 10-7 Physical Line Config (X.21/V.35) Dialog
10-1
Figure 10-8 Physical Line Alarm Config (X.21/V.35) Dialog
10-1
Figure 10-9 Logical Port Config (FR) Dialog
10-17
Figure 10-10 FR Port RTCs Dialog
10-2
Figure 10-11 FR Port RTCs (CLLM) Dialog
10-23

Tabl e1-1 LED Colors
1-2
Tabl e1-2 CiscoView Quick Guidelines
1-6
Tabl e2-1 Node Dialog Paramet e r
2-2
Tabl e2-2 Redundancy Info Dialog Paramet e r
2-4
Tabl e2-3 Redundancy Info Create Window Parameters
2-5
Tabl e2-4 LAN Interface Info Dialog Paramete r
2-7
Tabl e2-5 Serial Interface Info Table Paramet e r
2-8
Tabl e2-6 Clock Source Info Dialog Parameter
2-10
Tabl e2-7 Front Card Info Dialog Paramete r
2-11
Tabl e3-1 ASC Card Configuration Dialog Parameter
3-1
Tabl e3-2 ASC Features Dialog Parameters
3-3
Tabl e3-3 Disk Diagnostics Dialog Paramet e r
3-3
Tabl e4-1 ASC Card Configuration Dialog Parameter
4-1
Tabl e4-2 Service Module Features Dialog Parameters
4-3
Tabl e4-3 ATM Port RealTime Counters Dialog Paramete r
4-4

Tabl e6-5 Cards/Channels (FR) Dialog Paramet e r
6-11

Tables
xvi
WAN CiscoView for the MGX 822
Release 2.0, January 2000
Tabl e6-6 Card/Channels State Info (FR) Dialog Paramete r
6-15
Tabl e6-7 Physical Line Config (dsx3) Parameter
6-17
Tabl e6-8 Physical Line Alarm Config (dsx3) Parameter
6-19
Tabl e6-9 dsx3 Counters (1 of 2) Paramet e r
6-21
Tabl e6-10 dsx3 Counters (2 of 2) Paramet e r
6-23
Tabl e6-11 Channelized Line Config(dsx1) Dialog Parameters
6-24
Tabl e6-12 Channelized Line Alarm Config (dsx1) Dialog Paramet e r
6-26
Tabl e6-13 Channelized Line RealTime Counters (dsx1) Dialog Parameters
6-30
Tabl e6-14 Logical Port Config (FR) Dialog Paramete r
6-31
Tabl e6-15 FR Port RTCs Dialog Paramete r
6-35
Tabl e6-16 FR Port RTCs (CLLM) Dialog Parameters
6-37
Tabl e6-17 FR Port Resource Partition Config Dialog Parameter

7-31
Tabl e7-15 FR Port Resource Partition Config Dialog Parameter
7-32
Tabl e7-16 Logical Ports (Service Queue) Dialog Paramete r
7-33
Tabl e8-1 Card Configuration Dialog Paramete r
8-1
Tabl e8-2 FRSM Service Module Features Dialog Parameters
8-3
Tabl e8-3 FR Port RealTime Counters Dialog Paramete r
8-4
Tabl e8-4 Lines Dialog Parameter
8-7
Tabl e8-5 Ports Dialog Parameter
8-10
Tabl e8-6 Channels Dialog Paramet e r
8-13

Tables
xvii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Tabl e9-1 Card Configuration Dialog Parameters
9-1
Tabl e9-2 FRSM-HS1 Service Module Features Dialog Parameters
9-3
Tabl e9-3 FR Port RealTime Counters Dialog Paramete r
9-4
Tabl e9-4 X21/HSSI Ports Dialog Parameters
9-6

Tabl e11-4 Card/Lines (X21-HSSI) Dialog Parameters
11-6
Tabl e11-5 Ports Dialog Parameter
11-8
Tabl e12-1 Card Configuration Dialog Paramete r
12-1
Tabl e12-2 IMATM Service Module Features Dialog Parameters
12-3
Tabl e12-3 IMATM Clock Configuration Parameter
12-
Tabl e12-4 IMATM Port Configuration
12-5
Tabl e13-1 Card Configuration Dialog Paramete r
13-1
Tabl e13-2 AUSM Service Module Features Dialog Parameters
13-
Tabl e13-3 ATM Port RealTime Counters Dialog Paramete r
13-4
Tabl e13-4 Lines Dialog Parameter
13-6
Tabl e13-5 AUSM dsx3 Lines Table Paramet e r
13-8
Tabl e13-6 Card/Ports (ATM) Dialog Parameters
13-11
Tabl e13-7 Card/Ports (Forum Compliant IMA Groups) Dialog Parameters
13-1
Tabl e13-8 AUSM Channels Dialog Parameter
13-1
Tabl e14-1 Card Configuration Dialog Paramete r
14-2

17-1
Tabl e17-9 DSX3 PLCP Alarm Configuration Parameter
17-12
Tabl e17-10 Channelized Line Config (dsx1) Dialog Paramet e r
17-1
Tabl e17-11 DSX3 Channelized Line Configuration Parameter
17-1
Tabl e17-12 X21 Lines Configuration Paramet e r
17-1
Tabl e17-13 X21 Physical Line Alarm Configuration Dialog Parameter
17-18
Tabl e17-14 Sonet Line Configuration Paramet e r
17-1
Tabl e17-15 Sonet Line Configuration Paramet e r
17-2
Tabl e17-16 Sonet Counters Configuration Parameter
17-2
Tabl e17-17 ATM Line Configuration Paramete r
17-2
Tabl e17-18 SRM Counters Dialog Parameters
17-22
Tabl e17-19 SRM Line Distribution (SRM3T3) Dialog Parameters
17-2
Tabl e17-20 Logical Ports Parameters CES
17-2
Tabl e17-21 Logical Ports Parameter
17-2
Tabl e17-22 FR Port RTCs Dialog Paramete r
17-2
Tabl e17-23 FR Port RTCs (CLLM) Dialog Parameters

Tabl e18-12 FRSM Channel Counters (RCV) Dialog Paramet e r
18-12
Tabl e18-13 FRSM Channel Counters (XMT) Dialog Parameter
18-1
Tabl e18-14 Channel SAR Counters Dialog Paramete
18-14
Tabl e18-15 CESM Channel Counte r
18-1
Tabl e18-16 ATM Lines Dialog Parameters
18-15
Tabl e18-17 ILMI Dialog Parameters
18-1
Tabl e18-18 IMA Group Counters Dialog Parameters
18-1
Tabl e18-19 BNM Dialog Parameters (1 of 2)
18-17
Tabl e18-20 BNM Line Counters Dialog Parameters (2 of 2)
18-1
Tabl e18-21 SRM Counters Dialog Parameters
18-17

Tables
xx
WAN CiscoView for the MGX 822
Release 2.0, January 2000
xxi
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Preface
This section discusses the objectives, audience, organization, and conventions of the

This publication is organized as follows:
Chapter 1, “Product Overview” presents an overview of WAN CiscoView.
Chapter 2, “Displaying and Configuring Nodes,” provides instructions for displaying and configuring
node information on the WAN CiscoView interface.
Chapter 3, “Configuring ASC Cards,” provides instructions for displaying and configuring ASC
information on the WAN CiscoView interface.
Chapter 4, “Configuring 4-port Cards,” provides instructions for displaying and configuring 4-port
information on the WAN CiscoView interface.
Chapter 5, “Configuring CESM Cards,” provides instructions for displaying and configuring CESM
information on the WAN CiscoView interface.
Chapter 6, “Configuring FRSM-2CT3 Cards,” provides instructions for displaying and configuring
FRSM-2CT3 information on the WAN CiscoView interface.
Chapter 7, “Configuring FRSM-2T3/E3 Cards,” provides instructions for displaying and configuring
FRSM-2T3/E3 information on the WAN CiscoView interface.
Chapter 8, “Configuring FRSM 8-port Cards,” provides instructions for displaying and configuring
FRSM 8-port card information on the WAN CiscoView interface.
Chapter 9, “Configuring FRSM-HS1 Cards,” provides instructions for displaying and configuring
FRSM-2CT3 information on the WAN CiscoView interface.
Chapter 10, “Configuring FRSM-HS1/B Cards,” provides instructions for displaying and configuring
FRSM-HS1/B information on the WAN CiscoView interface.
Chapter 11, “Configuring FRSM-HS2 Cards,” provides instructions for displaying and configuring
FRSM-HS2 information on the WAN CiscoView interface.
Chapter 12, “Configuring IMATM Cards,” provides instructions for displaying and configuring
IMATM information on the WAN CiscoView interface.
Chapter 13, “Configuring AUSM Cards,” provides instructions for displaying and configuring AUSM
card information on the WAN CiscoView interface.
Chapter 14 “Configuring BNM T3/E3 Cards,” provides instructions for displaying and configuring
BNM T3/E3 information on the WAN CiscoView interface.
Chapter 15 “Configuring BNM 155 Cards,” provides instructions for displaying and configuring BNM
155 information on the WAN CiscoView interface.

Note
Means
reader take note
. Notes contain helpful suggestions or references to material not
covered in the publication.
Related Documentation
The following documentation may be useful if you are using WAN CiscoView for the MGX 8220:
•
Release notes—Describe new features and special considerations (including known software bugs)
and provide software upgrade procedures.
•
On-line help.
xxiv
WAN CiscoView for the MGX 822
Release 2.0, January 2000
Preface
Related Documentation
CHAPTER

1-1
WAN CiscoView for the MGX 8220
Release 2.0, January 200
1
Product Overview
General Description
WAN CiscoView is a GUI-based device management software application that allows you to
•
display a graphical representation of the network device
•
display configuration and performance information