class="bi x0 y0 w1 h1"
class="bi x0 y0 w1 h2"
class="bi x0 y0 w2 h3"
class="bi x0 y0 w3 h3"
class="bi x0 y0 w2 h4"
class="bi x0 y0 w1 h3"
class="bi x0 y0 w2 h3"
class="bi x0 y0 w3 h2"
class="bi x0 y0 w1 h4"
class="bi x0 y0 w4 h1"
PREFACE
The object of this book is to present the basis of chemical kinetics in
combination with its modern applications in chemistry, technology, and biochemistry. A
brief historical note is given below. The material is traditionally divided into formal
kinetics and kinetics in the gaseous phase.
The main concepts of chemical kinetics were formulated during the end of the
19 th century when C. Guldberg and P. Waage formulated the law of action mass (1867)
and Arrhenius his famous equation (1889) of the temperature dependence of the rate
constant. The book "Etudes de dynamique chimique" (1884) written by Vant-Hoff was
the first monograph on chemical kinetics. In this monograph, chemical kinetics was
presented as simple chemical reactions. It was in the beginning of the 20 th century that
researchers faced complicated mechanisms of chemical reactions and during the period
1910-1935, chain reactions were discovered (M. Bodenstein, N. Semenov, S
Hinshelwood). In this period, chemical kinetics was transformed into the science of
complex chemical reactions in gaseous and liquid phases. Simultaneously, the theory of
the elementary act of monomolecular and bimolecular reactions was advanced. The
absolute rate theory was developed in the 1930s by S. Glasstone, K. Laidlerand and H.
Eyring. New advancements in the theory of chemical reactions began with the
appearance and development of quantum chemistry. The advanced theory of electron
and proton transfer as "simple" models of chemical reactions opened the way for a

enzymes, the "ideal" chemical catalysts, are the formation of intermediates, smooth
thermodynamic relief along the reaction coordinate, fulfilment of all selection rules, the
ability to proceed and to stop temporarily and spatially, and compatibility with the
ambient media. These properties are attributable to multifunctional active centers, to the
unique structure of protein globules, possessing both rigidity and flexibility, and the
formation of catalytic ensembles.
Biochemistry gives chemistry a plethora of knowledge about nearly "ideal"
catalysts, the enzymes as catalysts close to the enzymes and opens the way for chemical
modeling of the enzyme reactions.
A major advantage of this work is that it is a comprehensive manual embracing
practically all the classical and modem areas of chemical kinetics. Special sections deal
with important subjects, which are not covered sufficiently in other manuals: 1) Methods
of calculation and determination of rate constants of reactions in gas and liquid phases;
2) Modem areas such as laser chemistry (including pico- and femtochemistry),
magnetochemistry, etc.; 3) Modem theories of electron transfer, including long-distance
electron transfer; 4) Analysis of kinetics and mechanisms and voluminous illustrations
of "classical" processes, such as chain reactions, gas phase and homogeneous reactions
(including homogeneous catalysis), etc.; 5) Discussion of enzymatic reactions from the
viewpoint of chemical kinetics with emphasis on the special gains biocatalysis offers
chemistry; 6) Analysis of the situations where enzymes cope with "tough" chemical
problems under mild conditions: hydrolysis peptides, substrate oxidation, nitrogen
fixation, long-distance electron transfer conversion of light energy to chemical energy,
etc.; and 7) Chemical modeling of enzymes: achievements and problems.
This monograph is intended for scientists working in various areas of chemistry
and chemical and biotechnology, as well as for instructors, graduate and undergraduate
students in departments of chemistry and biochemistry.
The authors appreciate to the fullest extent the enormous contribution to the
foundation and development of modern chemical kinetics by a number of the most
prominent scientists, the patriarchs, whose photos appear at the beginning of this book.
The authors are deeply indebted to Profs. R. Lumry, J. Jortner and S Efrima for

Mathematical Sciences. Oleg M. Sarkisov currently is the
Professor of Chemistry and vice director at N.N. Semenov
Institute of Chemical Physics of the Russian Academy of
Sciences and the Professor at the Faculty of Molecular and
Biological Physics of Moscow Institute of Physics and
Technology. He is the author of more than 200 publications. His
scientific interests: kinetics and dynamics of elementary reactions,
laser spectroscopy, and photochemistry.
Gertz I. Likhtenshtein received his Ph.D. degree in 1963 at the
N.N. Semenov Institute of Chemical Physics, Russian Academy
of Sciences. The topic of his thesis was " Oxidative Destruction
and Inhibition of Polymers". Then his research interest moved to
enzyme catalysis and he began his carrier at the Institute of
Molecular Biology, Academy of Sciences. In 1965 Likhtenshtein
returned to the Institute of Chemical Physics and was appointed
on the position of the Head of Laboratory of Chemical Physics of
Enzyme Catalysis. This Institute granted him the degree of Doctor
of Science (1972) and the Professor title (1976). In 1977 he was
awarded with the USSR State Prize for his pioneering research on
spin labeling in molecular biology. In 1992 Likhtenshtein
moved to the Department of Chemistry, Ben-Gurion University of
the Negev, Beer-Sheva on the full professor position and was in
charge of the Laboratory of Chemical Biophysics. At present his
main scientific interests focuses on the long-distance electron
transfer in proteins and model systems, multielectron and
synchronous processes in chemistry and biology, distribution of electrostatic potential around molecules
of biological importance, and developments of novel fluorescence-photochrome biosensing of fluidity of
biomembranes, express immunoassay, analysis of nitric oxide in solution, and antioxidant status of
bioobjects. Likhtenshtein authored 6 books and about 350 scientific papers.
Part 1

conditions.
Third, the kinetics studies the methods for controlling the chemical process using
catalysts, initiators, promoters, and inhibitors.
General ideas of chemical kinetics
Fourth, the kinetics tends to open the
mechanism of the chemical process,
to
reveal from which elementary steps it consists, what intermediate compounds are
formed in it,
via
what routes reactants are transformed into products, and what fac-
tors are responsible for the composition of products. In the result of the kinetic study,
authors compose the scheme of the mechanism of the process, analyze it and com-
pare with experimental data, state new testing experiments, and if necessary supple-
ment the scheme and repeat checking. Various elementary reactions of formation and
transformation of active species, radicals, ions, radical ions, molecular complexes,
etc.,
participate in many complex chemical processes.
Therefore, fifth, an important task of the kinetics became the study and descrip-
tion of elementary reactions involving chemically active species.
Elementary acts
of
the chemical transformation are diverse, they can be theoretically described by the
methods of quantum mechanics and mathematical statistics.
Sixth, the chemical kinetics studies a relation between the structure of particle-
reactants and their
reactivity.
In most cases, the chemical transformation is preceded
by physical processes of the activation of particle-reactants. These processes often
accompany chemical processes and manifest themselves, under certain conditions,

ture of particles, interatomic distances, dipole moments, and others. These data are
required for the development of assumed mechanisms of transformations. The chem-
ical thermodynamics makes it possible to calculate the thermodynamic characteris-
tics of the chemical process. The kinetics borrows from mathematics the mathemat-
ical apparatus necessary for the description of the process, analysis of the mecha-
nism, and development of correlations. The kinetics uses molecular physics data
when the process is analyzed at different phase states of the system where the reac-
tion occurs. Spectroscopy and chromatography provides the kinetics with methods of
process monitoring. Laser spectroscopy serves as a basis for the development of
unique methods for studying excited states of molecules and radicals.
In turn, results of the chemical kinetics compose the scientific foundation for the
synthetic chemistry and chemical technology. The methods for affecting the reaction
developed in the kinetics are used for controlling the chemical process and creation
of kinetic methods for the selective preparation of chemical compounds. The meth-
ods for retardation (inhibition) of chemical processes are used to stablize substances
and materials. Kinetic simulation is ised for the prognostication of terms of the oper-
ation of items. The kinetic parameters of reactions of substances contained in the
atmosphere are used for prognosis of processs that occur in it, in particular, ozone
formation and decomposition (problem of the ozone layer). The kinetics is an impor-
tant part of photochemistry, electrochemistry, biochemistry, radiation chemistry, and
heterogeneous catalysis.
1.2. History of the appearance of chemical kinetics
Chemical kinetics is a rather young science among other chemical disciplines.
The fist book on the kinetics "Etudes de dynamique chimique" by J. Van't Hoff
appeared in 1884. If counting off the chronology of kinetic studies from this date, the
kinetics is about 100 years old. However, the first kinetic studies in which the rate of
chemical reactions was studied appeared much earlier. In 1850 German physicist L.
F. Wilhelmy published the work "The Law of Acid Action on Cane-Sugar" in which
he established for the first time the empirical relation between the rate of the chemi-
cal reaction of cane-sugar hydrolysis to glucose and fructose and the amount of reac-

and pioneered in deriving formulas for the description of the kinetics of reactions of
the first and second orders.
Our compatriot N. A. Menshutkin made a great contribution to the development
of the kinetics. In 1877 he studied in detail the reaction of formation and hydrolysis
of esters from various acids and alcohols and was the first to formulate the problem
of the dependence of the reactivity of reactants on their chemical structure. Five
years later when he studied the hydrolysis of
tert-amyl
acetate, he discovered and
described the autocatalysis phenomenon (acetic acid formed in ester hydrolysis
accelerates the hydrolysis). In 1887+90, studying the formation of quaternary ammo-
nium salts from amines and alkyl halides, he found a strong influence of the solvent
on the rate of this reaction (Menschutkin reaction) and stated the problem of study-
ing the medium effect on the reaction rate in a solution. In 1888 N. A. Menschutkin
introduced the term "chemical kinetics" in his monograph "Outlines of Development
of Chemical Views."
The book by J. Van't Hoff" Etudes de dynamique chimique" published in 1884
was an important scientific event in chemistry. In this book, the author generalized
data on kinetic studies and considered the kinetic laws of monomolecular and bimol-
ecular transformations, the influence of the medium on the occurrence of reactions
in solutions, and phenomena named by him "perturbing factors." The large section
of the outlines is devoted to the temperature influence. Van't Hoffhad come right up
against the law, which was several years later justified by S. Arrhenius. Using the
History of the appearance of chemical kinetics 5
correlation for the chemical equilibrium and temperature
dlnk/dt = q/2 7 a (1.3)
(where K is constant, and q is the heat of equilibrium), he deduced for the rate con-
stant the dependence in the form
dlnK/dT = A/I ~ + B.
In 1889 Arrhenius theoretical-

tury the kinetics developed
via
several directions. First, simple gas phase reactions
were studied and their theory was worked out (encounter theory, theory of absolute
reaction rates). Second, various chain reactions (at first in the gas phase and then in
solutions) were discovered and studied. Third, various organic reactions in solutions
were intensely studied. Fourth, correlations became very popular for the comparison
of kinetic data. Fifth, quantum-chemical calculations are widely used for theoretical
simulation of chemical reactions.
1.3. Rate of chemical reaction
One should distinguish the rate of changing the concentration of the substance,
General ideas of chemical kinetics
which enters into or is formed during the chemical transformation, the rate of trans-
formation (conversion), and the rate of chemical reaction. When reactant A enters
into the chemical reaction, the rate of its transformation VA =
-d[A]/dt.
For the final
reaction product Z, the rate of its formation is Vz =
d[Z]/dt.
Evidently, the change in
the concentration is expressed in units [concentration] : [time] and, depending on the
concentration units, can be presented in the form 1 mol/(s) = 103 mol/(m 3 s) 2 = 10
"3
mol/(cm 3 s)= 6.022-10 z3 cm -3 s "l = 12.19T 1 kilogram-force/(cm 3 s)= 1.6-10 T 1Hg
mm/s = 1.22-10-4T l Pa/s. Degree of transformation (conversion) of the reactant x is
equal to the ratio of the amount of the transformed substance to its initial amount.
The conversion rate is
x - v-A ~ (dnA/dt),
(1.5)
where nA is the stoichiometric coefficient of reactant A, and nA is the amount (number of

Rate of chemical reaction
If the volume of the system changes during the reaction (the reaction is carried
out at a constant pressure), the concentration of reactants and products changes due
to both the chemical transformation and change in the volume.
This should be taken into account in the calculation in the reaction rate. In this
case, we have
d[A] [A]o
dV
(1.9)
V~ , ~~~
v A dt V o dt
When the reaction is performed in an open system, the concentration of the sub-
stance changes due to both the chemical reaction and the income of reactants into the
reactor and removal of products. In a well-stirred reactor in the steady-state regime
of the work, the reaction rate is the following:
v = (u/VnA)([A]o -
[A]) (1.1 O)
where u is the volume feed rate of the reactant to the reactor with the volume V, and [A]o and
[A] are the concentrations of the reactant at the inlet and outlet of the reactor, respectively.
In the heterophase system where the reaction occurs at the interface, the rate of
chemical transformation is referred not to the volume unit but to the surface unit
where the transformation occurs. In these systems the reaction rate can be determined
as the number of chemical transformations occurred on the surface unit per time unit
and can be expressed in mol/(m 2 s). The average volume rate of transformation ~ is
related to the process rate v s that occurs on the surface by the correlation
v s (mol m -2 s -1) = v
(V/S)
(mol 1 "l s-l). (1.11)
Usually the information on the kinetics of the process is obtained in the form of
a kinetic curve from which the reaction rate is calculated. The average reaction rate

nAA + nBB | Products
depends on the concentrations of the reactants as follows:
v: k[A]"' [B] "~ : kl"I r (1.14)
i
where ni is the number of particles of the reactant i participating in the reaction.
The exponent nA is named the
reaction order with respect to reactant
A, and nB
is the reaction order with respect to reactant B. For simple reactions na and nB are
integers (1 or 2). In complex reactions the reaction order can be fractional and even
negative. The order with respect to each reactant is a particular order. The overall
reaction order n is equal to the sum of exponents with respect to all reactants: n = Sni.
Usually n = 1 or 2, rarely 3. The idea of"order" for the complex reaction has some-
what different sense. The particular order with respect to a certain reactant charac-
terizes the influence of the concentration of this reactant on the overall reaction rate.
This influence can change depending on the concentration of this or other reactants.
1.5. Order and rate constant of the reaction
The order of the reaction with respect to each reactant and its
rate constant
are
important kinetic characteristics of the chemical reaction. When several reactants are
involved in the reaction, two following methods are used.
1. One of the reactants,
e.g.,
A, is taken in deficient in order to neglect the con-
sumption of other reactants during the time of experiment. In this case, a change in
the reaction rate both in time and from experiment to experiment is determined only
by the concentration of this reactant: v = omst[A] "A. Then the reaction order can be
found by one of the methods described below in this Section.
Order and rate constant of the reaction

the reactant concentration.
Dependence of the reaction rate changing in time on the cur-
rent concentration of the reactant (Van "t Hoff method)
Since the reactant is consumed during the reaction and this influences on the
10
General ideas of chemical kinetics
process rate, the order and rate constant can be estimated in the same experiment
comparing the current reaction rate vt with the current concentration of the reactants
c,(t)
or one reactant [A]t. The reaction order is determined as in the previous ease
from the dependence
logv t = const + nlog[A]t.
(1.19)
The value of const is used to determine the reaction rate constant from formulas
(1.17) or (1.18), depending on the ratio of concentrations of the reactants. The reac-
tion order determined through vt coincides with n determined through vo if the reac-
tion is simple and a change in the medium due to the accumulation of products does
not affect the rate constant of the reaction.
Time of conversion by 1/p part
(Noyes Ostwald method)
The time of conversion of the reactant by the 1/p part is unambiguously related
to the order and rate constant of the reaction. At n = 0 the time
fin
= [A]o/2ko. Thus,
the conversion period is always proportional to [A]o. At n = 1
tu2
= l~ 1
ln2 and
tl/p=
ln[p/(p-1)] (1.20)

tl/2/tl/4
= 2.4 (n = 1), 3 (n = 2), 3.86 (n = 3), and at n ~ 1
tu2/q/4
= (2 n'l - 1)[(4/3) n-1 - 1 ]-1 (1.23)
In the general case, at n ~ 1 the ratio
tup
[p(p- 1)]~-1-1
, ,
t,/q
[q(q_ l)]'l _ I
(1.24)