77 11 190 895
NOVEMBER 1996
Edition Anglaise
Trim and Upholstery
"The repair methods given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The methods may be modified as a result of changes by the manufacturer in the
production of the various component units and accessories from which his vehicles
are constructed".
All copyrights reserved by Renault.
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault.
C
Renault S.A. 1996
GENERAL
SIDE OPENING ELEMENTS TRIM
FRONT SEAT FRAMES AND SEAT RUNNERS
REAR SEAT FRAMES ANDSEAT RUNNERS
FRONT SEAT TRIM
REAR SEAT TRIM
SEAT FITTINGS
TRIM FOR OPENING ELEMENTS (
OTHER THAN SIDE
)
BODY INTERIOR TRIM
REAR SHELVES
EXPLODED VIEW
PRC70.3
A Front and rear door handles
B Interior trim fastenings on body side

72
72-1
72-2
72-3
72-5
72-6
Pages
70-1
GENERAL
70
A Bonnet trim
B Tailgate trim
C Hood exterior trim (cabriolet)
D Padding (cabriolet)
E Hood interior trim (cabriolet)
F Changing the hood bonded rear
screen (cabriolet)
G Changing the hood rear screen
secured by zip fastener (cabriolet)
73-1
73-1
73-2
73-7
73-9
73-13
73-20
TRIM FOR OPENING ELEMENTS
(OTHER THAN SIDE)
73
A Side shelf

77-3
FRONT SEAT TRIM
77
A Rear bench seat frame
B Seat trim
B Seat trim (cabriolet)
C Seatback trim
C Seatback trim (cabriolet)
78-1
78-2
78-3
78-4
78-5
REAR SEAT TRIM
78
A Head restraint trim
B Ski flaps (cabriolet)
B Rear head restraints (cabriolet)
79-1
79-2
79-2
SEAT FITTINGS
79
1 - Stapler tool Type :
NAUDER*
and stainless steel clips
2 - Rivets Part number :
77 03 072 280
3 - Neoprene adhesive
4 - Brush

Interior trim fastenings on body side
71
B
(A) Snap fastening
90230R1
(C) Snap fastening
90231R
71-2
REMOVING THE UPPER TRIM (1)
Unpick the upper section then free the seals by
pulling it away.
Remove:
- the seat belt mounting from the centre pillar,
- the seat belt height adjustment pushrod
(component in two sections).
92340R
BODY INTERNALIOR TRIM
Centre pillar upper trim
71
C
92339G
Remove the sliding cover from the adjustable
mounting.
71-3
Remove:
- the upper trim from the centre pillar (1) see section 71 B
- the mounting screws,
- the lower seat belt mounting.
By hand, free the rear part of the trim from the surrounding seal and remove clips (B).
Proceed in the same way for the front part of the trim.

71-5
Remove in the following order:
1 - 2 - 3
PRF7105
BODY INTERIOR TRIM
Rear section interior trim
71
F
L 53
SALOON
71-6
REMOVAL
PRF7106
BODY INTERNAL TRIM
Rear quarter panel trim
71
F
D 53
CABRIOLET
Open the hood and tilt the rear seat.
Remove the lower seat belt mounting and the
hood opening handle.
94810R
Remove nut (A) and unclip the fir tree type clips.
Detach the trim from the rubbing strip.
94811R
71-7
SILL PANEL
Fit the two lower sill panel trims (1) which serve as a storage compartment in the bottom of the side panel
trim.

door).
HIGH SPECIFICATION MODEL TYPE STORAGE
COMPARTMENT
92262R
SIDE OPENING ELEMENTS TRIM
Door storage compartment
72
A
Remove the two screws (5) and free the storage
compartment from the lower snap fastenings (7),
by pushing it upwards.
BASIC MODEL TYPE STORAGE COMPARTMENT
92263R
72-1
(1) pressure stud
(2) clip on door
Remove the trim.
NOTE :
the trim is clipped in place (1) and sealed
by mastic.
To remove it, the trim must be unpicked and uns-
tuck gradually (use a saw blade to cut the mastic)
then free it from the upper rubbing strip.
NOTE
: when changing a door or the trim, trim
sealing mastic part number 77 01 421 049 must be
reapplied (see Technical Note N.T. 219 "DOOR
TRIM SEALING MASTIC").
Remove:
- the internal opening control,

Remove:
- the pulling handle,
- the loud speaker grille and storage compart-
ment,
- the internal handle.
For all removal-refitting operations, the door trim
seal must be changed.
PRF7202
72-4
Remove:
- the rear view mirror internal cover (1),
- the internal handle (2),
- the internal opening handle (3),
- the speaker grille(4),
- the storage compartment(5).
Disconnect the rear view mirror harness (left hand
side).
PRF7203
SIDE OPENING ELEMENTS TRIM
Door trim
72
B
D 53
CABRIOLET
94792R
72-5
(1) pressure stud
(2) clip on door
Remove the trim.
NOTE :

B
73-1
Opening the hood
PRF7303
Lift the rear of the hood.
Remove the safety device and open the hood
compartment.
Fold the rear section of the hood back into the
compartment.
TRIM FOR OPENING ELEMENTS (OTHER THAN SIDE)
Hood exterior trim
73
C
D 53
CABRIOLET
The operations described below must be carried out on both the left hand and right hand sides.
Any incorrect operation of the hood triggers an alarm. The order of operations must be followed.
Fold the sun visors forwards.
Open the front locks without folding back the
hood.
Operate the unlocking handle (this opens the rear
hood locks and the hood compartment).
73-2
Remove the plastic clips.
Free the two sections of material which corre-
spond to the front section.
After opening the hood
Removal
Remove the rear seals and slides.
Remove the four plastic clips.

94788S
Remove the formed section of the rear part of the
hood.
TRIM FOR OPENING ELEMENTS (OTHER THAN SIDE)
Hood exterior trim
73
C
D 53
CABRIOLET
Remove the rivets at the rear ends and at the
front of the rear pillar.
73-5
Start at the rear.
Clip the rear section taking care to centre the
hood (it is marked).
Route the tensioning cable and secure it.
Refitting
94788S
TRIM FOR OPENING ELEMENTS (OTHER THAN SIDE)
Hood exterior trim
73
C
D 53
CABRIOLET
Fold the hood forwards.
Stick the rear screen stiffener.
Refit the rubber seal.
Tilt the hood towards the rear and stick the front
section.
Drill the holes in the trim and refit the plastic clips.