SPEC SHEET
TrueNet
®
Category 6 RJ45 Patch Panel - Leadframe Style
ADC KRONE’s range of patch panels have
become the industry standard in many
countries around the world. Part of this success
is due to ADC KRONE’s market reputation for
quality and performance. This can be
attributed to the fundamental LSA-PLUS
®
technology and the gas tight, robust leadframe
contacts.
Leadframe technology replaces the printed
circuit boards (PCBs) found within most
outlets. Laboratory results prove that leadframe
contacts provide a more robust and
mechanically stable solution than solder points
on PCBs. Solder points on PCBs can become
weak and eventually lead to open circuits
which is the worst possible scenario for an
RJ45 connector. ADC KRONE’s Category 6
RJ45 patch panels not only provide reliability
and performance, but also security and
durability.
Features:
• Category 6 component compliance
• Available in 16, 24 and 32-port
configurations (black in colour)
• Available with your choice of rear cable
management, either the patented

Mailing Address: PO Box 335, Wyong NSW 2259, Australia
Sales Support: 1800 801 298 [email protected]
www.adckrone.com/nz
NEW ZEALAND 2 Nevis Street, Petone, Wellington
Mailing Address: PO Box 38-177, Wellington Mail Centre 6008, New Zealand
Sales Support: 0800 657 663
SPEC SHEET
TrueNet
®
Category 6 RJ45 Patch Panel - Leadframe Style
Specifications
MECHANICAL
Wire diameter range for solid
& stranded copper conductors:
0.50 - 0.65mm* (24-22 AWG)
Wire Insulation diameter range (PE, PVC): 1.04 - 1.60mm (0.041” - 0.063”)
Number of plug insertion cycles: ≥ 750
Number of wire terminations: ≥ 10
RJ Socket, 8 positions, general specification: FCC 68.500
IEC 603-7
*If any conductors have been terminated, reversal to smaller conductors is no longer possible.
ELECTRICAL
Transmission, performance and reliability:
TIA/EIA 568-B.2-1 Category 6
ISO/IEC 11801 Class E
ACMA Compliance
Voltage/Current rating at 25˚C ambient: ≤ 150 V AC at 2.5 A max.
Dielectric strength: ≥ 1.5 kV AC
RJ Interface resistance: ≤ 20m Ω
ENVIRONMENTAL AND SAFETY