Your partner for sealing technology worldwideYour partner for sealing technology worldwide
Sealing Technology in
Pulp and Paper Production.
50 E
Applications
Mechanical Seals
2
EagleBurgmann – Your partner
for sealing technology in
the pulp and paper industry
Worldwide demand for paper and paperboard in 2005 was about 360
million tons and is likely to grow to about 500 million tons by 2020.
The pulp and paper industry therefore continues to be a definite
growth sector. If anything, developments such as the “paperless
office” or “new media” have actually contributed to an acceleration
in the consumption of paper. With paper consumption continuing to
rise, it is becoming extremely important to strike a harmony between
economy and the protection of the environment. This implies a careful
use of wood as a regenerative material, controlled consumption
of water and energy, and particularly the recycling of waste paper
as a “raw material”. Modern sealing technology makes a major
contribution to optimized production processes and their further
development.
The paper industry today
The processes needed to produce pulp
and paper are highly energy-intensive. If
only for reasons of economy companies
are concerned, therefore, to minimize
the specific consumption of their
mostly self-generated supplies of steam
and electricity through continuous

the recirculating water systems ever
more, the paper and pulp industry has
achieved drastic reductions in water
consumption and associated waste
water. The specific waste water level,
for example, has now been cut to less
than 10 l/kg and any further reductions
now only appear possible with difficulty.
However, the achievement of what
are more or less completely closed
water circulation systems has in turn
led to other problems such as the
accumulation of micro-organisms and
harmful substances, for example, which
are an impairment to the production
processes.
A matter of trust
A large number of major international
suppliers of machinery to the paper
industry trust in EagleBurgmann seals:
ABS Scanpump, Andritz, Andritz-Küsters,
Metso, Netzsch, Sulzer, Voith, to name
just a few.
Service with a capital “S”
Even the perfect seal calls for expert
consulting, staff training and after-sales
service in the event of trouble. Ask us
about the extensive range of services
covered by our TotalSealCare
®

Mechanical seals are usually the first
choice these days for use in pumps
and mixers, provided they comply with
an extensive catalog of requirements.
They must be wear-resistant, rugged
and protected against dry running, have
smooth surface contours with by and
large no empty spaces, and be universal
in application and easy to install.
LP-D for
“non-flow” operation
4
Mechanical pulp
production
Groundwood pulp is mostly produced
by mechanical means, with up to 95 %
of the wood input being converted into
pulp. Compared with the production of
chemical pulp the yield is about twice
as high, although the process does
consume large amounts of energy.
For groundwood pulp production, debar-
ked timber is processed in (pressurized)
grinders (PGW, GMP). An alternative
method is to fiberize chips in refiners. In
this case a distinction is made between
thermo-mechanical (TMP) and chemi-
thermo-mechanical (CTMP) pulp. In the
TMP production process the chips are
pre-treated with steam.

11
11
21
37
35
23
23
37
4
31
5
2
5
5
18
27
5
18
18
18
18
18
18
18
26
19
17
16
15
10

See flap for explanation of
code numbers and seal group selection
5
TMP refiner equipped with double seals. In
the Metso refiner, for example: H-D10/2270-
E1 (p
1
= max. 10 bar, t
1
= max. 180 °C, n =
max. 2,300 min
-1
). Chipped wood is
steam-treated at up to 180 °C and then
broken up into individual fibers in the
pressure refiners.
5
5
5
30
2
24
2
23
16
37
37
19
18
18

20
11
From the chemical
recovery system
Pre-bleaching
White water
Multistage bleaching
Fillers and
pigments
To the
paper machine
= Chemicals
Chemical
recovery system
See flap for explanation of
code numbers and seal group selection
33
Chemical pulp production
20
3
5
6
2
5
5
5
5
29
2
29

30
2
24
2
23
16
37
37
19
18
18
18
19
18
36
18
15
2
2
6
10
17
3
1
2
36
36
20
20
2

The sulphite process removes the lignin
from the wood by means of a digesting
solution consisting of sulphurous
acid (H
2
SO
3
) and a base (e.g. Ca
2+
,
Na
+
, Mg
2+
or NH
4+
). Compared with
sulphate pulp, the sulphite variety is
lighter in color but not as strong. Only
certain types of wood are suitable for
the sulphite process, of which spruce
and beech are two; pine on the other
hand, cannot be broken down using this
process. In both processes the waste
materials produced during the removal
of the lignin and the recovery of the
chemicals are used to generate energy
and steam.
Sulphate process
In the sulphate (or kraft) process the

hydrogen peroxide or ozone.
7
Pressure screens (Lamort) are sealed
successfully with either type HJ977GN,
MFL85N6 or HR10 mechanical seals,
according to pulp consistency.
2
5
4
32
19
18
28
18
18
18
18
18
18
18
18
19
6
19
2
20
7
2
30
6

code numbers and seal group selection
Waste paper treatment system
8
Waste paper treatment
The recycling of raw materials is a
priority objective of every modern,
ecologically oriented industrial society.
In no other sector has the collection
and recycling of raw materials attained
such significance as in the paper
industry. In 2005, 79 % of waste paper
was recycled in Germany. In terms of
the recycling and re-use of waste paper,
therefore, Germany is ahead of every
other country in the world. The collected
paper is first sorted and pressed into
bales. Mixed with plenty of water and
a certain amount of chemical additives
it is then fiberized in so-called pulpers
and sorted into slightly and heavily
contaminated fractions.
Ink is separated with the help of
chemicals and mechanical force in the
de-inking process and the subsequent
flotation can be skimmed as foam from
the surface. Depending on its ultimate
use and required quality, the waste
paper stock thus obtained can now
be bleached, either on an oxidative
(hydrogen peroxide) or reductive

18
18
18
18
18
19
6
19
2
20
7
2
30
6
6
24
24
2
1
20
19
2
38
19
27
1
30
7
25
13

(groundwood pulp, chemical pulp,
waste paper pulp, fillers and other
additives) are fed to the stock
preparation plant where the stock is
mixed. The circulating water from the
paper machines is used to dilute the
stock according to the requirements
of the chosen paper (consistencies
from around 0.1 to 1.3 %), and before
the stock is fed into the head box it is
cleaned again. The standard equipment
used for mechanical paper production is
the endless wire paper machine, which
contrasts with the board machine on
which different types of boards can be
made. The stock is transferred from the
head box to the wire section where the
water is removed from the endless web
of paper. Most of the water which has
to be removed is removed in the wire
section and the web of paper is then
transferred to the press section. More
water is removed under the application
of pressure and vacuum.
10
18
18
20
30
24

for graphics papers. However, even after
it has been through the smoothing rolls
in the machine the paper still has not
achieved the quality required for high-
grade writing paper and printing paper.
This is only achieved by calendering, in
which the paper is compacted and the
surface upgraded even further. Here
the webs of paper run through 4 to 10
pairs of rolls in the calender which are
either heated or cooled depending on
requirements.
LP-Q
Metso refiner for
groundwood pulp
production
12
Applications for mechanical seals
Seal solution: EagleBurgmann
HSSHRS8-D4 double seal of cartridge
design; rotating seat, stationary spring
arrangement protected from the
medium, seal faces with hydrodynamic
grooves for better lubrication of the
sliding faces, clean water as the buffer
medium. Seals in pressure grinding
machines (from Metso, for example)
have to be as reliable as possible. This
is because every repair necessitates
dismantling the entire rotating unit of

arrangement protected from the
product, and rotating seat. Flushing
on the product side prevents the
medium from entering the sealing
compartment (as used, for example, in
Andritz, Pallmann and Metso refiners;
where water flushing is on the product
side these seals last for about 5 to 8
operating years on average).
Pressure grinding machines
When it comes to grinding processes,
pressure grinding is now the most
widely used method because it
produces a higher quality of pulp.
The fibers are loosened by grains of
corundum embedded in the surface of
the grinding stone. The fibers isolated
from the tissue structure in this way are
sprayed with jets of water to remove
them from surface of the stone, to land
in a grinding trough below the stone.
Operating conditions:
Temperature … 150 °C
Pressure … 6 bar
Speed … 350 min
–1
Shaft diameter … 450 mm
Shaft displacement: Axial … ± 4 mm;
radial … ± 1 mm
Medium: Groundwood pulp,

Seal solution:
 MG12, MFL85N, HJ977GN
component seals
 e.g. EagleBurgmann MG12S14/ d1-
G1 rubber bellows single seal with
a rugged spring with unrestricted
allround flushing, and no dynamic
O-ring. The special feature here is the
enlarged gap between the shaft and
the inner diameter of the seat.
 Cartex-SNO, LP-S single cartridge
seals, e.g. LP-S-S32-E10/60-00, a
semi-cartridge seal adapted to the
machine featuring a stationary super
sinus spring arrangement protected
from the product, rotating seat with
double elastic support, shrink-fitted
sliding faces, smooth external
contours on all seal parts in contact
with the product.
Pulp transportation
Centrifugal pumps (stock pumps)
The design of pump to be used will
vary according to the consistency of
the pulp (thin, medium or thick pulp).
The vast majority are pumps for thin
pulp with a pulp consistency of up to
a maximum of 8 % abs. dry. There are
also special forms of thin pulp pumps
such as, for example, fan pumps and

Temperature … max. 80 °C
Pressure … max. 12 bar
Speed … 2,500 min
–1
Shaft diameter … 175 mm
Medium: Pulp suspension with
a maximum pulp consistency of 4 %
Axial displacement of the shaft ± 1mm
Installation position: vertical
Seal solution:
HR, LP-D, HRS-D
e.g. EagleBurgmann HR10S2/100-
G11E1 single cartridge seal for a Voith
sorter with rotating seat and stationary,
group spring arrangement protected
from the medium.
LP-D-ST-D15/130-DE double seal for
a Metso Tampella sorter in non-flow
operation without buffer fluid system,
with substantially reduced water
consumption in use at the Palm paper
factory in Wörth.
Mixing processes
In the pulp and paper industry, mixers
are used either for blending different
media, homogenizing ready-prepared
mixtures or preventing existing
mixtures from segregating again.
Given the diversity of tasks that mixers
are required to fulfill they also vary

the need for complete dismantling.
Operation is with flushing into the
product (which prevents concentrations
of the product building up on the
sliding faces) and a quench on the
atmospheric side. If a stand-still seal
is fitted it is also possible to carry out
inspection work on the seal without
interrupting operations, even with a full
container.
HGH
15
Calender rolls
Heat is generated by the high pressing
forces and friction involved, which has
a strong influence on the results of the
calendering process. For heavy glazing,
therefore, the steel rolls have to be
cooled, whereas light glazing requires
them to be heated.
Operating conditions:
Temperature … max. 200 … 300 °C
Pressure … max. 5 bar
Speed … 600 min
–1
Shaft diameter … 460 mm
Medium: Thermal oil
Special features: Expansion of the
long rolls under heat
Seal solution: EagleBurgmann

used successfully to seal off the oil used for
heating the rolls and for lubricating the
bearings. (p
1
= … 6 bar; t = 20 … 200 °C;
n = … 462 min
-1
; axial displacement ± 7 mm).
16
Greater cost effectiveness
thanks to reduced water consumption
levels because this is believed to be
necessary for safety reasons. Many
producers of pulp and paper are
therefore keen to run seal systems
with methods of operation which, while
meeting requirements for necessary
operational safety, use only minimum
amounts of water or, where possible,
even dispense altogether with the use
of sealing systems involving flushing or
buffer water.
As little water as possible,
as much water as required
The costs of water and sealing water
management have become increasingly
important issues in the paper and pulp
industry over recent years. Growth
in environmental awareness, stricter
environmental regulations, water

seals.
Major potential for savings
Mechanical seals, single seals with or
without flushing and/or a quench, and
double seals with pressurized water
supply all operate in different ways
and these differences have a major
influence on the amount of water they
use. For example, the use of a supply
unit along with the operation of a
double seal can, subject to specific
operating conditions, achieve savings
in buffer water consumption of up to
97 % compared to operation with an
open flow.
EagleBurgmann FLC100 Flow
Controller: A control unit for a
constant, pre-defined and
pressure-independent flow.
EagleBurgmann Thermosiphon
System: A supply unit with a closed
circuit for double seals in which the
only water consumption is the
leakage on the seal, which has to be
replaced.
18
Selecting mechanical seals for individual applications
Single cartridge seal. Designed for retrofi tting pumps by the
end-user. Stationary spring arrangement protected from the product.
Complete with fl ush connection as standard.

Group X
Example of a special double seal with stationary springs and rotating
seat used in refi ners successfully now for more than 15 years.
Example of a special single metal bellows seal used in
calender rolls.
Rubber bellows seal with knife edge face successfully used
in eccentric screw pumps for latex-containing coating paste.
H-D
MFLW . . S
MG1S50
19
Seal groups and recommendations
Code No.
Machine Process
Seal group
Sulphate
Sulphite
PGW
SGW
CTMP
TMP
De-inking
1 Bleach pump
      
D
2 Chest agitator
      
S
3 Strong liquor pump
 

X
14 Calender rolls
      
X
15 Digesting agitator
 
– – – – – D
16 Digester pump
 
– – – – – D/Q
17 Condensate pump
 
– –
 
– S
18 LC pump
      
S
19 MC pump
      
D
20 Mixer
      
S/D/X
21 Plugscrew feeder – – – –
 
– Q
22 Disperser
      
D

33 Stock pump
      
S/Q
34 Vacuum pump
      
S/Q/D
35 Pre-heater
 
– –
 
– S
36 Washer
      
S
37 Rotary valve
 
– –
 
– –
38 Fibrizer
      
D
39 Coating paste pump
      
X
 Machine/unit used in the process S = Single seal
 Machine possible in the process Q = Single seal with quench
– Machine not used in the process D = Double seal
X = Special design
Seal groups and types

3
 LP-D
 M7N/M7N back-to-back
 M74-D
 Cartex-DN
X Special designs
 H-D (example)
 MFLW S (example)
 HR…
 LP…
 HGH…
Designation of other
machines and plant
components
The components marked in the diagrams
with a number in a circle are included
for better understanding of the various
processes.
Waste paper
Dilution tank
Make-up tower
Bleaching tower
Chest
Flue gas cleaner
Cleaner
Diffuser
Evaporator
Barking drum
Extraction tower
Filter

(e.g. Kalrez
®
), PTFE
Spring and construction materials:
1.4571 (AISI 316 Ti); 1.4462, 2.4610
(e.g. Hastelloy
®
C-4), Inconel
®
718
21
EagleBurgmann in profile
Burgmann Plant I Wolfratshausen (D) EagleBurgmann Niigata (J)
Burgmann Plant Judenburg (A)Burgmann Plant ll Eurasburg (D)
EagleBurgmann – An alliance with a great deal to offer our
customers and partners
Under the joint name of EagleBurgmann Industries, Burgmann and Eagle Industry,
Japan’s leading manufacturer of mechanical seals, together form the foundation
stone for a global alliance – an alliance with a dedication to quality and service and a
pronounced customer orientation.
The basis of this arrangement is an intensive and trusting cooperation that notably
strengthens the global competitiveness of both partners and makes them one of
the top suppliers of sealing technology in the world market. A world-wide presence,
market-orientated products and high-quality services must also be mentioned as
key factors of success. All this, together with the know-how and dedication of our
employees, means that we have considerable potential to offer our customers.
We are there when you need us
Customers want proximity, speed and solutions to their problems. Thanks to our world-
wide presence, flexibility and specialist know-how we can face these challenges with
quiet confidence. All over the world we offer our in-depth package of services – from

ISO TS 16949
Specialist company
in accordance with
the German Water
Resources Act
(Section 19)
Germanischer Lloyd
Approvals
ICC
test center
Umweltpakt
Bayern
(Bavarian
Environment
Agreement)
__________
All current
certificates:
www.burgmann.com/
QM
EagleBurgmann in your vicinity
All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications means, however, that they can
serve only as guide values. We must be notified of the exact conditions of application
before we can provide any guarantee for a specific case. Subject to change.
50E / E5 / 3.000 / 05.08 / 9.1.1 © 2008 EagleBurgmann Marketing Communications Germany
Burgmann Industries
GmbH & Co. KG
Äußere Sauerlacher Str. 6–10
D-82515 Wolfratshausen

Administrative building
Expobel - Office 501
223053 Minsky district
Phone +375 17 237 9365
Telefax +375 17 237 9363
Belgium
EagleBurgmann Belgium B.V.B.A.
Zagerijstraat 11
B-2960 Sint-Job-in't-Goor
Phone +32 / 3 / 6 33 99 44
Telefax +32 / 3 / 6 33 99 49
Brazil
EagleBurgmann do Brasil
Vedaçoes Industriais Ltda.
Av. Sta. Izabel, 1721
CEP - 13084-643 Barao Geraldo
Caixa Postal 65 60
Campinas - Sao Paulo
Phone +55 /19 / 37 49 97 40
Telefax +55 /19 / 37 49 97 42
Canada
EagleBurgmann Canada Inc.
8699 Escarpment Way,
Units #9 & #10
Milton, Ontario / Canada L9T 0J5
Phone +1/ 905 / 693 87 82
Telefax +1/ 905 / 693 05 35
Nova Magnetics-Burgmann Ltd.
One Research Drive
Dartmouth, Nova Scotia

Telefax +86 21 58 35 48 38
Colombia
William Tobon & Cia.
Cr. 7 - 64 - 50 - Ext. 301
Santafé de Bogota
Phone +57 / 1 / 211 76 75
Telefax +57 / 1 / 21 1 76 75
Cyprus & Lebanon
TRCI Ltd.
122, Limassol Ave. PO Box 24371
1703 Nicosia, Cyprus
Phone+357 22 42 79 80
Telefax +357 22 42 30 21
Czech Republic
EagleBurgmann Czech s.r.o.
Na Drahach 1364
CZ-15600 Praha 5 Zbraslav
Phone +420 / 2 / 57 92 05 05
Telefax +420 / 2 / 57 92 05 08
KE-Burgmann Czech s.r.o.
V Láznich 395
CZ-254 01 Jilove u Prahy
Phone +420 / 2 / 41 02 18 11
Telefax +420 / 2 / 41 02 18 30
Denmark
KE-Burgmann A/S
Expansion Joints Division
Park Allé 34,
DK-6600 Vejen
Phone +45 / 75 36 18 11

Läike tee 9, Peetri Küla, Rae vald,
EE-7531 2 Harjumaa
Phone +00372 742 24 29
Telefax +00372 512 012 0
Finland
KE-Burgmann Finland Oy
Expansion Joints
P.O. Box 139, Ensimmäinen Savu
SF-01510 Vantaa
Phone +358 / 9 / 82 55 01
Telefax +358 / 9 / 82 55 02 00
Tiivistetekniikka Oy
Mäkituvantie 5,
SF-01510 Vantaa
Phone +358 / 207 65 171
Telefax +359 / 207 65 20 07
France
EagleBurgmann France SAS
Zone d’Activité les Perriers
106/108 Route de Cormeilles
BP 96,
F-78505 Sartrouville
Phone +33 / 1/ 30 86 50 20
Telefax +33 /1/ 39 15 16 07
Germany
Kundenbetreuungs-Center Frankenthal
Carl-Benz-Straße 15
D-67227 Frankenthal
Service Center Rhein-Main
Phone +49 / 62 33 / 770 89-120

Telefax +49 / 2236 / 38 33 20
Kundenbetreuungs-Center Nord
Postweg 190
D-21218 Seevetal / Beckedorf
Service Center Nord
Phone +49 / 4105 / 6750-0
Telefax +49 / 4105 / 6750-191
Werksbüro Bremen
Phone +49 / 4105 / 6750-0
Telefax +49 / 4105 / 6750-193
Werksbüro Hamburg
Phone +49 / 4105 / 6750-0
Telefax +49 / 4105 / 6750-193
Euroseals Customer Service
Phone +49 / 4105 / 6750-0
Telefax +49 / 4105 / 6750-190
Werksbüro Oldenburg
August-Wilhelm-Kühnholz-Str. 45
D-26135 Oldenburg
Phone +49 / 4 41/ 5 46 39
Telefax +49 / 4 41/ 5 54 28
Kundenbetreuungs-Center Ruhr
Am Piekenbrocksbach 8
D-46238 Bottrop
Service Center Ruhr
Phone +49 / 2041/ 1 88 51-50
Telefax +49 / 2041/1 88 51-70
Werksbüro Ruhr
Phone +49 / 2041/ 1 88 51-14
Telefax +49 / 2041/1 88 51-20

Werksbüro Nürnberg
Riedäckerweg 2
D-90765 Fürth-Stadeln
Phone +49 / 91 1/ 7 67 00 87
Telefax +49 / 911 / 76 76 23
Werksbüro Regensburg
Aussiger Str. 9 e
D-93073 Neutraubling
Phone +49 / 9401/ 52 22 77
Telefax +49 / 9401/ 52 23 73
Espey Burgmann GmbH
Thomas-Edison-Str. 19
D-47445 Moers
Phone +49 / 2841 / 99827-0
Telefax +49 / 2841 / 99827-55
Great Britain
EagleBurgmann Industries
UK LP
12, Welton Road
Wedgnock Industrial Estate
GB-Warwick CV 34 5PZ
Phone +44 /1926 / 41 76 00
Telefax +44 /1926 / 41 76 17
KE-Burgmann U.K.
Eaton Bank, Congleton
GB-Cheshire SW12 1NZ
Phone + 44 / 1260 / 29 12 89
Telefax + 44 / 1260 / 29 13 03
Greece
A.G. Stambolidis & Co.

Phone +91 / 44 / 6 59 06 32
Telefax +91 / 44 / 6 59 09 17
Indonesia
PT EagleBurgmann Indonesia
Jl. Jababeka Blok J6-E
Kawasan Industri Cikarang
Bekasi 17550 - Jawa Barat
Phone +62 / 21/ 8 93 53 13
Telefax +62 / 21/ 8 93 53 15
Irak
WTE
Ukba Sq., Mahala 929
Zuhak 2, House No. 5
P.O. Box No. 2421
Al Jadria, Baghdad
Phone +964 171 99033
Telefax +964 171 93034
Iran
Burgmann Pars
Sealing Systems Co.
No. 1, Kokab Alley,
Pasdaran Ave.
Teheran
Phone +98 / 21/ 2 86 28 19
Telefax +98 / 21/ 2 85 44 81

Israel
ETA Engineering Ltd.
P.O. Box 890
Ramat-Gan 52108

Globe Interstar
Furmanova Street 240, Office 18
050059 Almaty
Phone +7 / 327 / 264 34 86
Telefax +7 / 327 / 264 33 82
Korea
EagleBurgmann Korea Co. Ltd.
541, Suwolam-Ri, Seotan-Myon
Pyongtaek-Si, Kyongki-Do,
-451-850-,
Pyongtaek Yosu Busan Daegu
Phone +82 / 31/ 664-40 95
Telefax +82 / 31/ 664-40 94
Branch Offices: Ulsan
Kuwait
Dan Trading & Contracting
Co. W.L.L.
P.O. Box 5092
13051 Safat, Kuwait
Phone +965 / 2 43 25 53
Telefax +965 / 2 43 78 33
Lat via
Filter SIA
Aizkraukles 21
10069 Riga
Phone +00371 7801 921
Telefax +00371 7550 224
Libya
United Technical & Engineering
Miseran St.

Angle Rue Michel de l'Hôpital
et Rue Jules Cesar
Casablanca 05
Phone +212 / 240 / 87 99
Telefax +212 / 240 /19 39
Netherlands
EagleBurgmann Netherlands B.V.
Koningsschot 9
NL-3905 PP Veenendaal
Phone +31/ 318 / 54 20 00
Telefax +31/ 318 / 54 15 35
New Zealand
EagleBurgmann New Zealand Ltd.
P.O. Box 34285, Birkenhead,
3 Parity Place, Glenfield, Auckland
Phone +64 / 9 / 4 43 57 72
Telefax +64 / 9 / 4 41 27 66
Nigeria
Sealing Engineering Services Ltd.
82 St. Finbarr's College Road
Akoka / Yaba, Lagos
Phone +234 /1/ 82 59 09
Telefax +234 /1/ 82 59 09
Norway
EagleBurgmann Norway AS
P.O. Box 143
Industriveien 25 D
N-2021 Skedsmokorset
Phone +47 / 64 / 83 75 50
Telefax +47 / 64 / 83 75 75

No. 9769 National Road, Maduya
Carmona, Cavite
Phone +63 / 49 / 8 39 06 55
Telefax +63 / 49 / 8 39 06 54
Poland
KE-Burgmann Polska
Spólka z.o.o.
Al. Jerozolimskie 200
PL-02-486 Warszawa
Phone +48 22 535 1 6 00
Telefax +48 22 535 16 48
Portugal
EagleBurgmann Ibérica S.A.
Avda. de Quitapesares, 40
E-28670 Villaviciosa de Odón,
Madrid
Phone +34-91-616 66 01
Telefax +34-91-616 66 81
Qatar
Jaidah Motors and Trading Co.
P.O.Box 150
Doha / Qatar / Arabian Gulf
Phone +974 / 68 21 82
Telefax +974 / 41 41 00
Romania
EagleBurgmann RO S.R.L.
Bdul. Iuliu Maniu, Nr. 7
Cladirea E, Parter, Hala 3, Sector
RO-061072 Bucuresti
Tel. +40 / 314 25 09 09

52 Serangoon North Avenue 4,
#03-02 Ever Tech Building
555853 Singapore
Phone +65 / 64 81 34 39
Telefax +65 / 64 81 39 34
EBI Asia Pacific Pte. Ltd.
29 International Business Park,
Acer Blg, Tower B, #03-03
609923 Singapore
Phone+65 / 65 65 66 23
Telefax +65 / 65 65 96 63
KE-Burgmann Singapore Pte. Ltd.
Expansion Joints
Blk 7 Pioneer Road North
No. 01-51, Singapore 628459
Phone +65 / 62 61 85 81
Telefax +65 / 62 61 85 89
Slovenia (CRO, BIH, MAC, YU)
Branch Office Slovenia
Malci Beliceve 37
SLO-1000 Ljubljana
Phone +386 / 1/ 4 23 15 57
Telefax +386 / 1 / 2 57 40 57
Mobile +386 / 41 / 66 13 15
Slowakian Republic
EagleBurgmann Czech s.r.o.
Na Drahach 1364
CZ-15600 Praha 5 Zbraslav
Phone +420 / 2 / 57 92 05 05
Telefax +420 / 2 / 57 92 05 08

EagleBurgmann Sweden AB
Svärmaregatan 3
S-60361 Norrköping
Phone +46 /11 /14 00 05
Telefax +46 /11 /14 00 15
EagleBurgmann Sweden AB
Göteborg Office
Askims Verkstadsväg 4
S-436 34 Askim, Göteborg
Phone +46 / 31 / 58 68 50
Telefax +46 / 31 / 58 14 66
Postal adress:
Box 9101, 40093 Göteborg
Switzerland
EagleBurgmann (Switzerland) AG
Hofstrasse 21, CH-8181 Höri
Phone +41 / 44 / 8 60 88 00
Telefax +41/ 44 / 8 61 01 35
Taiwan
EagleBurgmann Taiwan Co. Ltd.
1F No. 7, Lane 144 Chi Lin Rd.
Taipei
Taiwan, R.O.C.
Phone +886 -2- 2581 0040
Telefax +886 -2- 2523 2793
Thailand
EagleBurgmann (Thailand) Co. Ltd.
Banga Tower C, Floor 18th
40/14 Moo 12 Banga-Trad Rd.
Km. 6.5 Bangkaew, Bangplee

Globe Interstar
Andaliba Street 82
74011 Ashgabat
Phone +993 / 12 / 47 73 24
Telefax +993 / 12 / 47 73 25
Ukraine
IRT-Technogerm
Ul. Komsomolskaja, 130
40009 Sumy
Phone +380 542 610 324
Telefax +380 542 610 326
United Arab Emirates
EagleBurgmann Middle East FZE
P.O. Box 61310
Jebel Ali Free Zone
Dubai
Phone +971/ 4 / 8 83 88 41
Telefax +971/ 4 / 8 83 88 43
Uruguay
Bilpa S.A.
Casilla Correo 889
Código Postal 11800
Santa Fé, 1.131 - Montevidéo- UY
Phone +598 / 2 / 29 33 43
Telefax +598 / 2 / 29 06 87
USA
EagleBurgmann Industries LP
10035 Brookriver Dr.
Houston, Texas 77040
Phone +1/ 713 / 9 39 95 15