FIBER OPTIC SOLUTIONS
ThinLITE™ CABLES
Mechanical & Environmental Characteristics
Test Single Fiber Duplex Cable Zipcord
Crush Resistance: EIA-FOTP-41A 400 N/cm 400 N/cm 400 N/cm
Impact Resistance: EIA-FOTP-25B 50 Impacts 100 Impacts 50 Impacts
Flexing: EIA-FOTP-104A 1000 Cycles 1000 Cycles 1000 Cycles
Maximum Pulling Load: EIA-FOTP-33A 400 Newtons 600 Newtons 400 Newtons
(89 lbs.) (134 lbs.) (89 lbs.)
Maximum Safe Operating Load: 100 Newtons 200 Newtons 100 Newtons
(22 lbs.) (44 lbs.) (22 lbs.)
Minimum Bend Radius:
At Max. Load: 6 cm (2.36≤ ) 6 cm (2.36≤ ) 6 cm (2.36≤ )
Unloaded: 3 cm (1.18≤ ) 3 cm (1.18≤ ) 3 cm (1.18≤ )
Maximum Vertical Rise: without support 27.4 m 27.4 m 15.2 m
or service loop (90 ft.) (90 ft.) (50 ft.)
(UL) Listed Type:
OFNR (Riser): UL1666, IN Type Pass Pass Pass
Cable Knot Test: EIA-FOTP-87B Pass Pass Pass
Fiber Proof Test: 100 KPSI 100 KPSI 100 KPSI
High/Low Temp. Bend Test: EIA-FOTP-37A — — —
Cable Twist Test: EIA-FOTP-85A — — —
Operating Temperature: -20°C to +70°C -20°C to +70°C 0°C to +70°C
Storage Temperature : -40°C to +70°C -40°C to +70°C -40°C to +70°C -40°C to +70°C
(non-flexing)
Installation Temperature: 0°C to +70°C 0°C to +70°C 0°C to +70°C
Optical Specifications
Max. Typical Guaranteed Core Clad
Atten. Atten. Min. Dia. Dia. Numerical
Fiber Type (dB/km) (dB/km) Bandwidth (Microns) (Microns) Aperture
50/125 Multimode 3.5/1.5* 2.6/0.6* 400/400* 50 ± 3 125 ±2 0.200 ± 0.015

enhance connector
performance
Cable and Jacket Specifications and Ordering Information
Cable Cable
Cable No. of UL Diameter Weight Jacket
Part Number Type Fibers Type (in) (mm) (Nom. lbs./km) Type
5001INHSFH01016 Simplex 1 OFNR (Riser) 0.063 1.6 •• Plenum PVC
5002INHZCH01016 Zipcord 2 OFNR (Riser) 0.063 x 0.138 1.6 x 3.5 •• Plenum PVC
3002INHZCH06216 Zipcord 2 OFNR (Riser) 0.063 x 0.138 1.6 x 3.5 •• Plenum PVC
3002INHZCH05016 Zipcord 2 OFNR (Riser) 0.063 x 0.138 1.6 x 3.5 •• Plenum PVC
3002INSSDS06230 Duplex 2 OFNR (Riser) 0.118 3.0 •• Plenum PVC
3002INSSDS05030 Duplex 2 OFNR (Riser) 0.118 3.0 •• Plenum PVC
XXX = Fiber type, substitute this symbol in part number for desired fiber type as follows:
10 = Single-mode; 50 = 50/125 G.I. Fiber; 62 = 62.5/125 G.I. FDDI Grade Fiber; 62G = 62.5/125 G.I. Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber, 100 = 100/140 Fiber.
Multimode riser and plenum cables are available in orange. Single-mode riser and plenum cables are available in yellow.
†NR = Not Rated
KEVLAR is a registered trademark of the DuPont Co.
KRONE Australia
Tel: +61 2 4388 4422
Fax: +61 2 4388 4499
E-mail:
KRONE China
Tel: +86 21 5442 3680
Fax: +86 21 5442 2711
E-mail:
KRONE Hong Kong
Tel: +852 2865 4888
Fax: +852 2861 1444
E-mail:
KRONE Japan

E-mail:
KRONE Korea
Tel: +82 2 565 4844
Fax: +82 2 555 5779
E-mail:
KRONE Thailand
Tel: +662 637 8301
Fax: +662 637 8306
E-mail:
www.kroneasia.com
Duplex
Simplex
Zipcord