KRONE Premis
NET
®
SYSTEM WARRANTY
CONDITIONS FOR END USER
The Premis
NET
System Warranty is subject to the
following conditions. ENDORSED INSTALLER COMPANIES
and END USERS should both read these carefully. If you
are in any doubt as to their meaning please contact the
Warranty Co-ordinator at KRONE in writing before
completing the WARRANTY REGISTRATION FORM.
It is a condition that the installation instruction sheets
and other written instructions have been adhered to
during installation. ENDORSED INSTALLER COMPANIES
should contact KRONE where there is any difficulty with
your understanding of these.
1. DEFINITIONS
1.1 In these conditions:
END USER The company to whom the System
Warranty Certificate has been issued.
KRONE KRONE (Australia) Holdings Pty
Limited
2 Hereford Street
Berkeley Vale NSW 2261 Australia
ENDORSED Means a company authorised in
INSTALLER writing by KRONE to be an
COMPANY ENDORSED INSTALLER COMPANY,
and to design and install a SYSTEM
to which the warranties herein shall

the Products.
WARRANTY Means up to 20 years from the date
PERIOD of completion of installation of the
SYSTEM.
1.2 Headings are included for ease of reference only
and shall not affect the interpretation of these
conditions.
2. PREMIS
NET
SYSTEM WARRANTY
2.1 KRONE warrants to the END USER that the tested
SYSTEM in its installed state shall meet or exceed
the SPECIFICATIONS in force at the time of
installation for the duration of the WARRANTY
PERIOD.
2.2 KRONE warrants to the END USER that the
Products which comprise the SYSTEM shall be free
from defects in materials and workmanship for
the duration of the WARRANTY PERIOD.
3. APPLICATIONS ASSURANCE WARRANTY
3.1 KRONE warrants to the END USER that, for the
duration of the WARRANTY PERIOD, the system shall
be free from defects which prevent operation of:
3.1.1 applications specified by recognised standards
or user forums that use the APPLICABLE
STRUCTURED CABLING STANDARDS, and
3.1.2 any other applications specified in writing by
KRONE.
4. ZERO BIT ERROR WARRANTY
4.1 KRONE warrants that the horizontal sub systems

apply only if the SYSTEM has been properly
installed by an ENDORSED INSTALLER COMPANY.
8. ALTERATIONS TO THE SYSTEM
8.1 Any alteration/repair, modification and/or addition
to a warranted SYSTEM must be properly installed
and tested by an ENDORSED INSTALLER
COMPANY.
8.2 Any replacement or additional PRODUCT used is
warranted free from defects in materials and
workmanship for the remainder of the
WARRANTY PERIOD applicable to the SYSTEM
unless a new SYSTEM is installed in which case a
new SYSTEM warranty certificate shall be issued,
subject to the terms applicable at the time of
notification to KRONE and approval by KRONE.
9. RECORDS AND TEST RESULTS
9.1 It is the responsibility of the END USER to store
and maintain accurate initial and any subsequent
installation layouts, drawings and test result data
for the duration of the WARRANTY PERIOD.
9.2 KRONE shall only issue a SYSTEM warranty
certificate after having examined and approved all
documents.
10. HOW TO APPLY FOR THE WARRANTY
10.1 The KRONE WARRANTY REGISTRATION FORM
must be completed by both ENDORSED INSTALLER
COMPANY and END USER (where indicated) and
sent to KRONE within 45 days of completion of
the installation of the SYSTEM.
11. CLAIMS PROCEDURE

of the WARRANTY PERIOD, or
12.1.2 the purchase price of the defective PRODUCTS
shall be refunded.
12.2 Subject to Clause 12.1, any defective PRODUCTS
removed by KRONE shall be repaired at the
premises at which they are located (in which case
the END USER shall ensure that KRONE or its
authorised representatives are allowed free access
for such purpose) or at the manufacturer’s
premises (as necessary).
12.3 If any PRODUCT has been upgraded, KRONE shall
have the option to use such a product to satisfy
its obligations providing that the functionality and
performance of the upgraded product is at least
equal to that set out in the specification for the
replaced PRODUCT.
13. KRONE’S LIABILITY TO YOU UNDER THIS
WARRANTY
13.1 The WARRANTIES in Clauses 2, 3, 4, 5 and 6
above shall only be applicable if:
13.1.1 the END USER presents the SYSTEM warranty
certificate issued by KRONE and
13.1.2 new PRODUCTS were used in the SYSTEM at
the time of installation and
13.1.3 the defect was not caused by incorrect or
negligent handling, disregard of any reasonable
instruction given by KRONE, any abnormal use
(including the use of unsuitable or defective
tools or equipment in connection with the
PRODUCTS), overloading, unreasonable wear

products exceed the purchase price of the
defective products. This clause shall survive failure
of an exclusive remedy.
14. ARBITRATION/CHOICE OF LAW
14.1 These conditions shall be governed by and
construed in all respect in accordance with the
law prevailing in the State of New South Wales,
Australia.
14.2 Nothing in these conditions shall purport to
exclude or restrict any liability the exclusion or
restriction of which is prohibited by law.
This KRONE Warranty Registration Form may only be
used by KRONE ENDORSED INSTALLER COMPANIES.
This KRONE Warranty Registration Form must be
used to apply for the KRONE Premis
NET
System
Warranty. This form should be jointly completed by
the ENDORSED INSTALLER COMPANY responsible for
the design and installation of the structured cabling
system, as well as the END USER. This form should
then be sent to KRONE,
Attention
The Warranty Co-ordinator,
(see right for address of your local sales office)
A System Warranty Certificate will be issued from
KRONE to the END USER via the Premis
NET
Endorsed Installer Company once the following
steps have been completed.

COMO WA 6152
PH:
+61 8
9474 6600
FAX:
+61 8
9474 3898
KRONE VIC/TAS
Suite 12, 622 Ferntree Gully Road,
WHEELERS HILL VIC 3150
Ph: +61 3 9560 0977
Fax: +61 3 9560 0988
KRONE ACT
1/42 Geils Court
DEAKIN ACT 2600
Ph: +61 2 6281 4580
Fax: +61 2 6281 4453
KRONE SA/NT
Suite 11, 297 Pirie Street
ADELAIDE SA 5000
Ph: +61 8 8236 0111
Fax: +61 8 8232 6699
KRONE NEW ZEALAND
Cnr The Esplanade & Nevis St
PETONE NZ
Ph: +64 4 576 9213
Fax: +64 4 576 9243
Email: [email protected]
Web: www.krone.com.au
Job No 5543

years from the date of installation.
Installation Practice
Did the ENDORSED INSTALLER COMPANY named on the
next page design the system? YES NO
If not, who designed the system?
.....................................................................................................
.....................................................................................................
Name of person who did the installation work
.....................................................................................................
KRONE Master Installer/Cabler Certificate No..........................
ACA License / Registration No ..................................................
Products used in installed system
Cabling (excluding Patch Cords)
Copper Cabling Part Number Brand Name of Cable Metres
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................
Fibre Cabling ........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................
Copper Hardware Part Number Description Number Installed
Patch Panels ........................................................................................................................................................................
........................................................................................................................................................................
Modules ........................................................................................................................................................................
........................................................................................................................................................................
Data Outlets ........................................................................................................................................................................
........................................................................................................................................................................
Fibre Hardware
Enclosures ........................................................................................................................................................................
Pigtails ........................................................................................................................................................................

NET
System Warranty to
the END USER, I certify that the information on this Form is
complete and correct. I understand that by signing this Form
I am agreeing to adhere to the conditions of the KRONE
Premis
NET
System Warranty Schedule B, Conditions for
Endorsed Installer Company of the Agreement.
ENDORSED INSTALLER COMPANY Name
....................................................................................................
Position.......................................................................................
Name ..........................................................................................
Registered Address
Street ..........................................................................................
....................................................................................................
Town/ City...............................................PC ...............................
Phone..........................................................................................
Fax...............................................................................................
Email ...........................................................................................
Signature..................................................Date ..........................
TO BE COMPLETED BY WARRANTY HOLDER
I confirm that
The System was installed by the ENDORSED
INSTALLER COMPANY referred to above.
I have received design data and the full test reports
of tests conducted for the purpose of applying for
the Premis
NET
System Warranty and will keep them

Compliance
(please tick appropriate solution)
All permanent links have been tested.......................or All channels have been tested
Warranty