Part Number: X05-49548

Released: 4/2000

Implementing and
Administering Microsoft
®

Windows
®
2000 Directory
Services
Course Number: 2154A

Classroom Setup Guide

Information in this document is subject to change without notice. The names of companies,
products, people, characters, and/or data mentioned herein are fictitious and are in no way intended
to represent any real individual, company, product, or event, unless otherwise noted. Complying
with all applicable copyright laws is the responsibility of the user. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of Microsoft Corporation. If, however, your only
means of access is electronic, permission to print one copy is hereby granted.


Online Program Manager: Debbi Conger
Online Publications Manager: Arlo Emerson (Aditi)
Online Support: David Myka (S&T Consulting)
Multimedia Development: Kelly Renner (Entex)
Courseware Testing: Data Dimensions, Inc.
Production Support: Irene Barnett (S&T Consulting)
Manufacturing Manager: Rick Terek
Manufacturing Support: Laura King (S&T OnSite)
Lead Product Manager, Development Services: Bo Galford
Lead Product Managers: Gerry Lang, Julie Truax
Group Product Manager: Robert Stewart
Course Number: 2154A
Part Number: X05-49548
Released: 4/2000
Classroom Setup Guide iii Contents
Classroom Requirements .........................................................................................1

Classroom Configuration.........................................................................................3

Setup Instructions.....................................................................................................5

Automated Classroom Setup....................................................................................7

Classroom Setup Checklist ....................................................................................12

4-gigabyte (GB) hard disk
!
256-kilobyte (KB) L2 cache
!
12X CD-ROM drive
!
Network adapter (must not use ISA bus)
!
4-MB video adapter
!
Super VGA (SVGA) monitor (17 inch)
!
Microsoft Mouse or compatible pointing device
!
Sound card with speakers
!
Internet access
!
Projection display device that supports SVGA 800x600, 256-colors

Software
The following software is required for the instructor computer:
• Microsoft Windows 2000 Advanced Server

2 Classroom Setup Guide Student Computer
Each student computer requires the following hardware and software
configuration. All hardware must be on the HCL for Microsoft Windows 2000

The following software is required for each student computer:
• Windows 2000 Advanced Server

Important
Classroom Setup Guide 3 Classroom Configuration
The following configuration and naming conventions are used throughout this
course and are required for the hands-on labs:
!
The instructor computer is named London.
!
The student computers are named according to the following table.

The following table shows the order in which student computers should be
installed, in addition to the names and IP addresses that should be assigned to
each computer. In the IP addresses, x is the classroom number.
Installation order Computer name IP address

1 Vancouver 192.168.x.1
2 Denver 192.168.x.2
3 Perth 192.168.x.3
4 Brisbane 192.168.x.4
5 Lisbon 192.168.x.5
6 Bonn 192.168.x.6
7 Lima 192.168.x.7
8 Santiago 192.168.x.8
9 Bangalore 192.168.x.9
10 Singapore 192.168.x.10


Setup Instructions
Use the following procedures to prepare each computer for class.

The instructor computer (London) must be set up completely before
you begin setting up the student computers. Student computer setup occurs over
the network by using file shares that are created on the instructor computer.

Before You Begin
You will need to do the following:
!
Read through all setup procedures.
!
Make sure that you have the Trainer Materials compact disc that is provided
with the course materials.
!
Prepare a Microsoft MS-DOS
®
system disk and a network boot disk.

MS-DOS System Disk
To set up the instructor computer, you must have an MS-DOS system disk. This
disk must include the following:
!
MS-DOS system files.
!
MS-DOS drivers for the CD-ROM drive of the instructor computer.
!
Xcopy.exe, Xcopy32.exe, and Xcopy32.mod. These files must be located
either on the root of the system disk or in a location that is specified in the


Setup Overview
Read this section before you begin configuring the computers. Failure to follow
the instructions in this Classroom Setup Guide will cause the labs to fail.
These setup instructions provide you with both automated and manual
installation procedures and automated configuration procedures. If you
complete the automated installation, the configuration is also completed
automatically. If you cannot complete an automated installation of the software,
you can follow the manual procedures in the Manual Classroom Setup Guide
on the Trainer Materials compact disc. Following a manual installation, you
must complete the post-installation configuration procedure. It is very important
that you allocate enough time for a manual installation if you are not sure that
the automated installation will work in your environment.

Verify that the classroom is set up correctly by referring to the
Classroom Setup Checklist section in this guide.

Estimated time to set up the classroom: 3 hours
Important