INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–1
IP
INSTRUMENT PANEL SAFETY
PAD
PRECAUTION
1. PRECAUTION FOR VEHICLE WITH SRS AIRBAG
AND SEAT BELT PRETENSIONER
(a) Some operations in this section may affect the SRS
airbags. Prior to performing the corresponding
operations, read the SRS airbag NOTICE.
2. TABLE OF BOLT, SCREW AND NUT
Code Shape Size Parts No.
<A>
φ=6 mm
(0.24 in.)
Length=20 mm
(0.79 in.)
90119-06166
<B>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)
93567-55016
<C>
φ=6 mm
(0.24 in.)
Length=20 mm
(0.79 in.)
90159-60610

Length=18 mm
(0.71 in.)
90119-06428
<I>
φ=6 mm
(0.24 in.)
90179-06206
<J>
φ=6 mm
(0.24 in.)
Length=15 mm
(0.59 in.)
90119-06915
<K>
φ=8 mm
(0.31 in.)
Length=20 mm
(0.79 in.)
91633-60820
<L>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)
90159-50305
<M>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)

φ=5 mm
(0.20 in.)
Length=20 mm
(0.79 in.)
90167-A0001
<S>
φ=6 mm
(0.24 in.)
Length=16 mm
(0.63 in.)
90080-11717
<T>
φ=6 mm
(0.24 in.)
Length=16 mm
(0.63 in.)
90080-11736
<U>
φ=6 mm
(0.24 in.)
90080-18071
<V>
φ=8 mm
(0.31 in.)
Length=20 mm
(0.79 in.)
90119-A0011
<W>
φ=5 mm
(0.20 in.)

φ=6 mm
(0.24 in.)
Length=16 mm
(0.63 in.)
90080-10171
Code Shape Size Parts No.
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–5
IP
COMPONENTS
STEERING COLUMN COVER
STEERING PAD
STEERING WHEEL ASSEMBLY
TURN SIGNAL SWITCH ASSEMBLY
WITH SPIRAL CABLE SUB-ASSEMBLY
LOWER NO. 2 STEERING
WHEEL COVER
LOWER NO. 3 STEERING
WHEEL COVER
8.8 (90, 78 in.*lbf)
50 (510, 37)
N*m (kgf*cm, ft.*lbf) : Specified torque
<D>
<D>
for TMC Made:
2.0 (20, 18 in.*lbf)
B137279E01
IP–6
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP

IP–7
IP
COMBINATION METER ASSEMBLY
COWL SIDE TRIM SUB-ASSEMBLY LH
FRONT DOOR SCUFF
PLATE LH
INSTRUMENT CLUSTER FINISH PANEL
LOWER INSTRUMENT PANEL
FINISH PANEL
LOWER INSTRUMENT PANEL FINISH PANEL LH
NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
LOWER INSTRUMENT PANEL
FINISH PANEL
<E>
<E>
<E>
<E>
with Smart Key System:
without Smart Key System:
<A>
<B>
for TMC Made:
COWL SIDE TRIM CLIP
B137281E01
IP–8
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
COMBINATION METER ASSEMBLY
COWL SIDE TRIM SUB-ASSEMBLY LH
FRONT DOOR SCUFF

<A>
<B> or <C>
for TMC Made:
COWL SIDE TRIM CLIP
B137282E01
IP–10
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
COWL SIDE TRIM SUB-ASSEMBLY RH
FRONT DOOR SCUFF PLATE RH
INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY
LOWER INSTRUMENT PANEL
SUB-ASSEMBLY
<O>
<O>
<O>
<N>
<O> or <P>
for TMMK Made:
COWL SIDE TRIM CLIP
B137282E03
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–11
IP
FLOOR SHIFT POSITION INDICATOR
HOUSING SUB-ASSEMBLY
NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
NO. 2 INSTRUMENT CLUSTER
FINISH PANEL GARNISH
SHIFT LEVER KNOB SUB-ASSEMBLY

UPPER CONSOLE PANEL SUB-ASSEMBLY
<O>
<O>
for TMMK Made:
with Navigation System:
without Navigation System:
NAVIGATION RECEIVER WITH HEATER
CONTROL PANEL ASSEMBLY
RADIO RECEIVER WITH HEATER
CONTROL PANEL ASSEMBLY
B137284E03
IP–14
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
CONSOLE BOX ASSEMBLY
CONSOLE BOX CARPET
CONSOLE BOX POCKET
FRONT PILLAR GARNISH LH
FRONT PILLAR GARNISH RH
INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY
INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY
NO. 1 CONSOLE BOX INSERT FRONT
NO. 2 CONSOLE BOX INSERT FRONT
for TMC Made:
<F>
<F>
<F>
<F>
<F>
<F>

FRONT PILLAR GARNISH CLIP
FRONT PILLAR GARNISH CLIP
<S> or <T>
Non-reusable part
B137285E03
IP–16
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
INSTRUMENT PANEL NO. 1
SPEAKER PANEL SUB-ASSEMBLY
INSTRUMENT PANEL NO. 2
SPEAKER PANEL SUB-ASSEMBLY
INSTRUMENT PANEL SAFETY PAD ASSEMBLY
NO. 1 DEFROSTER NOZZLE GARNISH
<K>
<K>
<C> or <H>
<I> or <Z>
for TMC Made:
20 (204, 15)
N*m (kgf*cm, ft.*lbf) : Specified torque
for LH Side:
for RH Side:
FRONT NO. 2 SPEAKER ASSEMBLY
FRONT NO. 2 SPEAKER ASSEMBLY
<C> or <H>
<I> or <Z>
B137286E01
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–17

NO. 3 HEATER TO
REGISTER DUCT
NO. 3 INSTRUMENT PANEL STAY
SIDE NO. 1 DEFROSTER
NOZZLE DUCT
SIDE NO. 2 DEFROSTER
NOZZLE DUCT
PLASMACLUSTER
with Plasmacluster:
for TMC Made:
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<M>
<M>
<L>
<L>
<J>
with Navigation System:
NAVIGATION ANTENNA ASSEMBLY

<O>
<O>
<O>
<O>
<O>
<O>
<O>
<X>
<X>
<X>
<X>
<W>
<Y>
NAVIGATION ANTENNA ASSEMBLY
NO. 2 ANTENNA CORD
SUB-ASSEMBLY
with Navigation system:
FRONT PASSENGER AIRBAG ASSEMBLY
N*m (kgf*cm, ft.*lbf)
: Specified torque
7.0 (71, 62 in.*lbf)
B137287E01
IP–20
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
REMOVAL
1. PRECAUTION
(See page IP-1)
2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
3. DISCONNECT CABLE FROM NEGATIVE BATTERY

PANEL LH (for TMMK Made)
(a) Remove the bolt <N> and the screw <O> or <P>.
(b) Disconnect the hood lock control cable assembly.
(c) Disengage the claw and the 9 clips.
(d) Remove the air hose, disconnect the connector, and
then remove the lower instrument panel finish panel
LH.
12. REMOVE STEERING COLUMN COVER (for TMC
Made)
(a) Remove the 2 screws <D>.
(b) Disengage the 2 claws and remove the lower
steering column cover.
(c) Disengage the claw and remove the upper steering
column cover.
13. REMOVE STEERING COLUMN COVER (for TMMK
Made)
(a) Remove the 2 screws <Q>.
(b) Disengage the 2 claws and remove the lower
steering column cover.
(c) Disengage the claw and remove the upper steering
column cover.
14. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH
SPIRAL CABLE SUB-ASSEMBLY (See page SR-39)
<N>
or
<O> <P>
B133980E02
<D>
<D>
B137294E01

IP–23
IP
19. REMOVE COMBINATION METER ASSEMBLY (for
TMC Made)
(a) Remove the 4 screws <E>.
(b) Disconnect each connector and remove the
combination meter assembly.
20. REMOVE COMBINATION METER ASSEMBLY (for
TMMK Made)
(a) Remove the 4 screws <R>.
(b) Disconnect each connector and remove the
combination meter assembly.
21. REMOVE FRONT DOOR SCUFF PLATE RH (See page
IR-26)
22. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
(See page IR-26)
23. REMOVE INSTRUMENT PANEL NO. 2 UNDER
COVER SUB-ASSEMBLY
(a) Disengage the 4 claws.
(b) Disengage the 2 guides and remove the No. 2
under cover sub-assembly.
24. REMOVE LOWER INSTRUMENT PANEL SUB-
ASSEMBLY (for TMC Made)
(a) Remove the bolt <A>.
(b) Remove the 4 screws <B>.
(c) Disengage the 3 claws and the 3 clips.
(d) Disconnect the connector and remove the lower
instrument panel sub-assembly.
<E>
<E>

remove the shift lever knob sub-assembly.
27. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for
Manual Transaxle)
(a) Turn the shift lever knob counterclockwise and
remove the shift lever knob sub-assembly.
28. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH
PANEL GARNISH
(a) Disengage the 2 clips and remove the No. 1
instrument cluster finish panel garnish.
<O>
<O>
<O>
<O>
<P>
or
<N>
B133992E02
B133990
B137272
B133993
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–25
IP
29. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH
PANEL GARNISH
(a) Disengage the 2 clips and remove the No. 2
instrument cluster finish panel garnish.
30. REMOVE FLOOR SHIFT POSITION INDICATOR
HOUSING SUB-ASSEMBLY (for Automatic
Transaxle)