1
ME-430 Introduction to Computer Aided Design
TRAY -
Pro/ENGINEER Wildfire 2.0
Dr. Herli Surjanhata
Pick the Create a new object icon
. 2Type in Tray for the name of the
new part.

Un-check Use default template. Create the base feature – Pick the
Extrude Tool icon
.
In the dashboard, click the

option.
Click on Define.

Pick TOP datum plane as Sketch Plane.

For Sketch Orientation Reference,
accept default RIGHT datum plane.

Then click the Sketch button
.
4


Click
to modify the dimension as shown.

5

Click
.

Type in 12 for the depth of extrusion. Click
.

6
Click
and select Standard

Pick FRONT as sketching plane, accept default and click Sketch button. 7
Pick all edges as additional reference – see figure below.

Click Close. Pick it as reference.

8
Pick to sketch the section as shown in the figure below, use to
dimension the sketch. Pick
to modify the dimensions. Click . Then Click .