LCD Monitor Service Guide

Disassembly & Re-assembly Models: MM17T/TE
MM19SE/TE

V01

Version Issue Date Remarks
V01 2006/06/26 First release

1
possible to cause scratch. 4. Always wear a ground strap or anti-static glove to protect the parts from static
discharge. 2

Suggest Tools
TOOL
Here are some tools that can be used for the LCD monitor’s service and repair.

Phillips-head Screwdriver
Use a Phillips-head screwdriver to fasten/remove the K- or B-typed screws.
CROSS
SCREW-
DRIVER
P/N: N/A

Gloves
To protect LCD Panel and your hand

GLOVES
(SOFT)
P/N :( L) 16-003300131 (M) 16-003300130


SUS MM17T and MM19 SE/TE LCD monitor consist of various subsystem.
This section describes the procedures for LCD monitor disassembly. In
addition, the detailed disassembly procedures of individual modules will be
provided for your service needs.

The disassembly procedure consists of the following steps:

A

• I. Stand Subsystem
• II. LCD Subsystem
• III. Front Bezel Subsystem
• IV. Boards Subsystem
5 II. LCD Subsystem
LCD
MODULE

The illustrations below show how to remove the LCD panel from the LCD Subsystem.

A. Removing Back Cover
LCD
SUBSYSTEM
REMOVAL

1. Remove 5 screws.

6


REMOVAL

1. Remove 4 screws.
9

2. Unplug LCD-inverter cables (A), key-control cable (B) and speaker cables (C).

A
A
11