310-016

Actualtests.com - The Power of Knowing

root:E8Z8pYrni6C/A:6445::::::
daemon:NP:6445::::::
bin:NP:6445::::::
sys:NP:6445::::::
adm:NP:6445::::::
lp:NP:6445::::::
uucp:NP:6445::::::
nuucp:NP:6445::::::
smmsp:NP:6445::::::
listen:*LK*:::::::
nobody:NP:6445::::::
noaccess:NP:6445::::::
nobody4:NP:6445::::::
user1:*LK*::::::11983:
user2:PWXi1K60LXz7U:11816::::::
user3:BYj1zG(T9WsG2:11816:::::11983:
user4:fbCp13KUDNh2E:11816::::7::
Which two statements are true? (Choose two)

A. user1 and listen are locked accounts.
B. The user3 accounts has an expiration date.
C. The user4 account will expire in seven days.
D. The user2, user2 and user4 accounts all had their passwords set by process ID 11816.

Answer: A, B

Explanation: (*LK* indicates locked accounts and the last field in etc/shadow indicates

reset
C. setenv use-nvramrc? False
reset
D. setenv use-nvramrc?=false
reset

Answer: C

QUESTION 195:

You have a system that has SCSI tape drives attached. You want to prevent these SCSI
tape drives from being used.
Which line should you add to the /etc/system file to prevent their use?

A. exclude drv/st
B. set drv/st=off
C. forceload drv/st
D. set drv/st=exclude

Answer: A

QUESTION 196:

You are a network administrator at Certkiller .com. You have a script that uses rusers
to tell you who is logged into your system on the network. You
suspect that you are not getting all the client machines to
report.
Which daemon may not be running on some of the clients?

A. rpc.cmsd

B. switch the console off and on several times
C. disconnect and reconnect the cables attached to the system
D. use the console keyboard to interrupt the system using appropriate key combinations

Answer: A, D

QUESTION 199:

Your boss at Certkiller .com is curios about Sun Solaris 9. Which two commands mount the
device /dev/dsk/c0t1d0s1 onto the mount point /mnt if there is an entry in the
/etc/vfstab file? (Choose two.)

A. mount /mnt
B. umount /mnt
C. mount /dev/dsk/c0t1d0s1 /mnt
D. mount /dev/rdsk/c0t1d0s1 /mnt

Answer: A, C

QUESTION 200:

You are a network administrator at Certkiller .com. You have hard linked Certkiller file1 and
Certkiller fil2 in the /var file system. What is the result of copying Certkiller file1 to the /export
file system?

A. A copy of Certkiller file1 is created in the /export file system
B. Certkiller file1 is hard linked so you cannot copy this file to another file system
C. A copy of Certkiller file1 is created in the /export file system and hard linked to Certkiller file1 in
the /var file system.
310-016

What is the effect?

A. The owner and mode of /var/tmp are set to root and 700, respectively
B. The owner and mode of /var/tmp/usercb are set equal to the current owner and mode of
/export/home/usercb.
C. The owner and mode of /export/home are set equal to the owner and mode of /export/home
before the backup (as stored on tape).
D. The owner and mode of /var/tmp/usercb are set equal to the current owner and mode of
/export/home before the backup (that is, as stored on tape).
E. The owner and mode of /export/home on the backup tape are updated with the current owner
and mode values of /export/home.

Answer: D

QUESTION 203:

You are a network administrator at Certkiller .com. You just used the command line to
create a new print spooler called Certkiller printer3. You want to configure this print spooler
to allow jobs to enter the queue, but not be sent to the printer associated with the queue.
310-016

Actualtests.com - The Power of Knowing

Which command can you use to accomplish this?

A. reject Certkiller printer3
B. enable Certkiller printer3
C. accept Certkiller printer3
D. disable Certkiller printer3


310-016

Actualtests.com - The Power of Knowing
Answer: QUESTION 207:

Given the command:
# pkgadd -d /cdrom/sol_9_sparc/s0/Solaris_9/Product
What is the result?
310-016

Actualtests.com - The Power of Knowing A. The system prompts you for which packages to install
B. The package named Product is installed into the spool directory
C. All packages are installed into the /cdrom/sol_9_sparc/s0/Solaris_9/Product directory
D. All packages within the /cdrom/sol_9_sparc/s0/Solaris_9/Product directory are
non-interactively installed

Answer: A

QUESTION 208:

At boot, the system reports this error:

D. The table of contents information for directories is placed at the
beginning of the ufsdump file, and file information is placed at the
end of the ufsdump archive
310-016

Actualtests.com - The Power of Knowing Answer: B

QUESTION 210:

Exhibit:

The steps that should be used to restore the entire contents of the / (root) file system from
the /dev/rmt/0 default tape device onto a newly installed disk are shown in the exhibit.
In which order should they be executed?

A. 4, 6, 1, 8, 7, 3, 5, 9, 10, 2
B. 4, 6, 8, 1, 7, 5, 3, 9, 10, 2
C. 4, 8, 1, 7, 5, 3, 6, 9, 10, 2
D. 4, 3, 5, 1, 7, 8, 6, 9, 10

Answer: B

QUESTION 211:

What is the result of mounting a file system with the noatime option enabled?

A. It enables the UFS logging

E. Create a soft partition using the -s initialize option with the appropriate command.

Answer: A

QUESTION 214:

An inexperienced administrator reports to you that they would like to see if a system is a
functioning native LDAP client. You suggest that they run a command to verify that the system
is configured as a native LDAP client.
Which command should you suggest?

A. ldaplist
B. ldapclient -v
C. ldapadd client
D. ldapsearch client

Answer: A

QUESTION 215:

While configuring NIS on a system, you execute the command string:
# domainname testlab.Region.Org.COM
Which two statements about this command are true? (Choose two)

A. The servers name is testlab, and it resides in the region.org.com domain.
B. Executing this command populates the /etc/defaultdomain file with the domain name.
C. The domain name is case sensitive, and must be configured exactly as specified on this
command-line.
D. The domain name is the entire character string testlab.Region.Org.COM, and no DNS domain
is specified.


Answer: E

QUESTION 218:

Given:
Lo0: flags=100849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
hme0:
flags=1000863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,IPv4>
mtu 1500 index 2
inet 192.200.200.9 netmask ffffff00 broadcast 192.200.200.255
ether 8:0:20:8a:74:e0
What is the MAC address?

Answer: 8:0:20:8a:74:e0

QUESTION 219:

Your syslog configuration file contains the line:
mail.debug ifdef('LOGHOST', /var/log/syslog, @loghost)
Which two are correct statements about this entry? (Choose two)
310-016

Actualtests.com - The Power of Knowing A. The ifdef statement is interpreted by the syslogd daemon.
B. If the loghost alias is set to be the local host, messages are sent to the /var/log/syslog file.

D. The configuration server.

Answer: C

QUESTION 222:

You are creating a Flash archive of your existing system which is to be used to install other
systems on the network in your configuration.
Which two are required by the flarcreate command? (Choose two)

A. The files to include in the archive.
B. The file in which to create the archive.
C. The name used to identify the archive.
D. The name of the user creating the archive.
E. The systems to be installed using the archive.

Answer: B, C

QUESTION 223:

The auto_home automount map is an example of which type of map?

A. xfn
B. direct
C. master
D. generic
E. indirect

Answer: E



A. The ypbind daemon was NOT running on the client.
B. The /etc/nsswitch.conffile was NOT configured to search NIS.
C. The ypmatch command should have used host.byaddr as its argument.
D. The ypmatch command searches the /etc/inet/hosts file, because the argument hosts was used
instead of the more specific hosts.byname.

Answer: C

QUESTION 226:

Which three name services provide, or can be customized to provide, locale information as used
in /etc/locale? (Choose three)

A. NIS
B. NIS+
C. UNS
D. DNS
E. NFS
F. LDAP

Answer: A, B, C

QUESTION 227:

Which daemon process, running on NIS master and NIS slave servers, respond to bind requests
from NIS clients?

A. ypxfrd
310-016

Answer: A

QUESTION 230:

You are monitoring a Solaris system named host1 as it boots, and the boot sequence proceeds as
far as the line:
Setting default IPv4 interface for multicast: add net 224.0/4:
gateway host1
The system then stops and waits.
Which is a possible solution to this problem?

A. Edit the /etc/vfstab file so that all boot time NFS mounts use the bg mount option.
B. Wait for the login prompt, supply the root password, and edit the /ect/nodename file.
C. Boot the system to single user mode and run the fsck command on all local file systems.
D. Wait for the login prompt, supply the root password, and manually start the rpcbind daemon.

Answer: A