Ecodial V3.38
Low-voltage
electrical installation
design software
Building a New Electric World
Fupact and
variable speed
drive integrated
With Ecodial V3.38, design low-voltage electrical installations
the easy way
Ecodial V3.38 complies with
the latest electrical standards, bringing
LV installation design software to a
new level of performance.
Build your installation diagram quickly and easily by
using standard electrical symbols from the toolbox
(e.g. transformer + conductor + protection).
You can even customise the toolbox by adding your
own group of symbols to the library.
You create your project with all the necessary general
information:
b one window to enter project data (project name,
customer name, etc.)
b another for the general electrical installation
characteristics used for the calculations (earthing
arrangement, cascading, etc.)
Default values can be modified and saved for future
projects.
All this information is used in the subsequent steps of
the design process and for the printout of the project
file. It can be modified at any time.

Diagram
Power sum
Calculation
Print and Export project
Global electrical characteristics
Circuit default value
Display curves
Calculation result
Schneider Offer
Association guide
Determine the source power
Just enter the current or power values for the various
loads and the applicable diversity factor in the power
sum window. Ecodial V3.38 calculates the required
source power, and can automatically balance single
phase loads on three phase boards.
Display the results at any time
The results of some or all of the installation calculations
can be displayed:
b item names
b discrimination characteristics
b power sum (items + consumption + currents)
b results for calculated items.
Step-by-step calculation
The preliminary results are displayed for each circuit:
b cable cross-sections with corresponding sizing criteria
b protective devices, Isc max (1, 2 or 3-phase), Isc min (1 or 2-phase), earth fault
current, R, X, trip unit settings
b voltage drops, earth-fault protection
Different simulations can be carried out at this stage to optimise the design.

Conception : SIS, Insign’Studio
Réalisation : Insign’Studio
Impression : JPF Impression
This document has been
printed on ecological paper.
b Fupact offer is perfectly integrated into
Ecodial
In Ecodial V3.38, the complete range of Fupact
is integrated: Fupact INF., Fupact ISFL and
Fupact ISFT. According to the Fupact offer,
users can choose their standards of fuses (BS,
Din or NFC). Ecodial V3.38 also takes Fupact
discrimination principles into account.
Now, Ecodial V3.38 brings to the users a wide
choice of fuses:
v Range: Fupact, GK1, GS1, LS1, Multi 9,
Diazed, aM, gG, gM
v Fuse-Combination Unit type: Switch
disconnector, disconnector, without FCU
v Fuse type (standard): DIN (or NH), NFC, BS
v Fuse model: aM, gG, gM, Diazed
v New representations:
b Variable speed integrated
Ecodial V 3.37 already carried out the new
products of the Altivar range: Altivar 11, 21, 31,
38, 61, 71. Ecodial V3.38 now also offers the
08, 28 & 68 Altivar series. These new products
enrich the motor starter catalogue. Users are
able to choose between direct on-line, start
delta, soft starters and variable speed drives.