Termination and Access Products
2nd Edition

www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
Table of Contents
Multifunction Panel
Introduction and Applications ................................................................................................................................ 1
Modules
DS1 Interconnect Module: 4-Termination ........................................................................................................ 4
DS1 Interconnect Module: 8-Termination ........................................................................................................ 4
DS1 Monitor Module...................................................................................................................................... 4
DS1 Front Cross-Connect Module: 8-Termination ........................................................................................... 5
DS3 Interconnect Module ............................................................................................................................... 6
Individual DS3 Circuit ..................................................................................................................................... 6
Splice/Storage Fiber Plug-In Module: 6-Termination ........................................................................................ 7
Ethernet Category 5e Module ........................................................................................................................ 7
Module Ordering Information ................................................................................................................................ 8
Chassis Ordering Information
Swing-out Chassis ........................................................................................................................................ 10
Bulkhead Chassis.......................................................................................................................................... 10
QCP Wire Distribution Panels
Introduction and Applications .............................................................................................................................. 11
QCP Standard Panel Ordering Information
200/400-Pair Standard Panel – 19" EIA ........................................................................................................ 12
200/400-Pair Standard Panel – 23" WECO ................................................................................................... 12
300/600-Pair Standard Panel – 19" EIA ........................................................................................................ 13
300/600-Pair Standard Panel – 23" WECO ................................................................................................... 13
QCP DCS Panel Ordering Information .................................................................................................................. 14
QCP Accessories Ordering Information ................................................................................................................. 15

QCP Wire Distribution Panels ............................................................................................................................... 34
Impedance Matching Panel .................................................................................................................................. 36
Wired Assemblies................................................................................................................................................. 37
Connectorized Cables .......................................................................................................................................... 49
Connectorized Terminal Blocks ............................................................................................................................. 53
Index .................................................................................................................................................................. 56
Table of Contents
Termination and Access Products
Multifunction Panel ............................................................... 1
QCP Wire Distribution Panels .............................................. 11
Impedance Matching Panel ................................................. 16
Wired Assemblies ................................................................ 19
Connectorized Cables ......................................................... 29
Terminal Blocks .................................................................... 31
Specifications....................................................................... 34
Index ................................................................................... 56

1
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
Multifunction Panel
Introduction
The compact, modular universal multifunction chassis provides a point for nonintrusive monitoring,
testing and patching of circuits in PCS, wireless, utilities, CAP, CATV and customer premises applications.
The common chassis accepts three individual plug-in modules or one CSU and one plug-in module. This
concept eliminates the need to purchase separate panels for each application.
Multifunction Swing-Out Universal Chassis
(Loaded with a ber, DS1 and DS3 module)
Multifunction Swing-Out Chassis

to sending the signal is essential in ensuring the downstream signal’s quality. Figure 2 illustrates
a typical base station with incoming signals connected to the multifunction panel before going
to the up/down converter.
MUX
DS3
T1
Voice
Data
SONET
Multifunction
Panel
Multifunction
Panel with
RF Module
Up/Down
Converter
Radio
Equipment
Demarcation
Multifunction
Panel
Multifunction
Panel
T1/E1
OR
T3/STS-1
Integrated Access
Concentrator
SERVICE PROVIDER CUSTOMER
Protector

Module
M3/1 DSX
BTS
Cross-Connect w/ Loopback
N
E
T
W
O
R
K
Multifunction
Panel
FOT
DSX-3 DSX-3 DSX-1 DSX-1M3/1 BTS
BTS
Fiber Dist.
Panel
Fiber
Optic
Terminal
Cross-
Connect
Cross-
Connect
Base
Station
Base Station
Multi-
Plexer

MFP-231002
MFP-232001
MFP-232002
(Front View) (Rear View)
(Front View) (Rear View)
5
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
Multifunction Panel
Modules
DS3 Interconnect Module (Modular)
Individual DS3 Circuit
Mounts in module MFP-243002
(Front View) (Rear View)
MFP-243002
MFP-243001
(Front View) (Rear View)
6
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
Multifunction Panel
Modules
Splice/Storage Fiber Plug-In Module
(Front View)
(Rear View)
MFP-250002
7
Ethernet Category 5e Module

4 wire-wrap IN/OUT
4 RJ48X IN/OUT
MFP-232002
DS3 interconnect module
One-position interconnect module with space for growth; total capacity of 3 DS3 circuits
Standard size coax jack access ports for testing or patching MFP-243002
Midsize coax jack access ports for testing or patching MFP-243006
Individual DS3 circuits
Standard size jack (mounts only in the MFP-243002 module) MFP-243001
Midsize (mini-WECO) coax jack (mounts only in the MFP-243006 module) MFP-243005
Ordering Information
9
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
Multifunction Panel
Modules
Description Catalog Number
Splice/storage fiber plug-in module
Singlemode SC adapters, no pigtails MFP-250004
Singlemode FC adapters, no pigtails MFP-250001
Singlemode ST
®
adapters, no pigtails MFP-250002
Multimode ST
®
adapters, no pigtails MFP-250003
Multimode SC adapters, no pigtails MFP-250005
6-position splice chips for fiber module
Heat shrink fusion FSC-HS

mounts in 19" (483 mm) or 23" (584 mm) EIA/WECO
racks or wall mount, adjustable flush, 25 mm (1"), 51
mm (2") or 127 mm (5") mounting.
89 mm x 439 mm x 267 mm
(3.5" x 17.3" x 10.5")
MFP-100000
Bulkhead chassis
3-positions 89 mm x 483 mm
(3.5" x 19")
MFP-110000
4-positions 89 mm x 584 mm
(3.5" x 23")
MFP-120000
Ordering Information
11
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
Benefits
• Circuit traceability and simplicity in wiring.
• Greater accuracy resulting in less time required
during system installation, maintenance and
future updating since all contacts are color-
coded and all connections are made at the
front of the QCP bays
• Easy accommodation of traffic pattern
changes, since reconfiguring is done mostly
at the front of the QCP bays
• Simpler office layouts, since office equipment
can be installed where space is available.

Wire Termination Contacts
This panel is available with either the insulation
displacement split cylinder contacts or wire-wrap
pins. The split cylinder contact provides for a
quick punch-down method of termination, which
is much faster than other methods requiring
patch cords, soldering, or wire-wrapping; yet
this contact termination is just as reliable as
wire-wrapping. The QCP insulation displacement
contact evenly distributes the holding force of
the cylinder, allowing many insertion/withdrawal
cycles and providing strain relief for the wire
resulting in a safe insulated termination. This
contact furnishes a gas tight connection, while
handling a variety of wire types.
Cable and Wire Routing
QCP Panels are provided with an arrangement of
fanning panels and wireways for easy wiring and
minimal wire congestion. A quadrant dressing
scheme is used to route wires to the side of the
bay and then up or down the vertical wireways,
either to other panels or to an express trough
to another bay. The backsides of the bays are
provided with brackets for easy routing and tying
of cables.
See pages 34-35 for specifications.
Individual QCP
Cylinder
Correct Strain
Relief for Wire

QCP Wire Distribution Panel
Standard Panel (300/600-Pair)
Description Catalog Number
19" EIA 1.75" rack spacing
Connectorized panels with rear 50-pin plug connector
300-pair QCP punch down Q39U2-1225M
300-pair wire-wrap W39X2-1225M
Non-connectorized panels
600-pair QCP punch down to wire-wrap QW89F4-1225X
300-pair wire-wrap to wire-wrap W39X2-1225X
23" WECO 2" rack spacing
Connectorized panels with rear 50-pin plug connector
300-pair QCP punch down Q43U2-1225M
300-pair wire-wrap W43X2-1225M
Non-connectorized panels
600-pair QCP punch down to wire-wrap W93F4-1225X
300-pair wire-wrap to wire-wrap W43X2-1225X
Ordering Information
Custom panels are available. Minimum quantities apply.
14
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
QCP Wire Distribution Panel
DCS Panel
Features and Benefits
• Convenient access point to monitor, test or
reconfigure circuits, eliminating work on the
DCS backplane and enabling troubleshooting
without uncabling.

• An alternative to hardwiring digital
telecommunications equipment directly
to the DCS.
• A fallback option for interconnection of
network elements if the DCS fails.
Description Dimensions (HxW) Catalog Number
Connectorized panel wire-wrap
112-circuit 102 mm x 584 mm (4" x 23") QCP-YDXXA1
448-circuit 152 mm x 584 mm (6" x 23") QCP-YGXXA4
Ordering Information
Non-connectorized panels are available. Please contact ADC.
15
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products
QCP Wire Distribution Panel
Accessories
Accessories Insulated Bridging Clips
Description Catalog Number
Tools
Impact tool QB-2
Replacement tip for QB-2 QB-2T
Manual tool (no spring loaded mechanism) Q115
Tool holder, bracket style Q150
QCP replacement kit includes instructions and the following:
– 25 red QCP housings
– 25 black QCP housings
– 25 white QCP housings
– 12 blue QCP housings
– 12 orange QCP housings

Twisted Pair
Cable
120 Ohms
Coax Cable
75 Ohms
Conversion Panel
Conversion Panel
Conversion Panel
Conversion Panel
Conversion Panel
Conversion Panel
Conversion Panel
Conversion Panel
Features and Benefits
Panels available with 8, 16, 24, or 32 circuits
Easily matches existing network equipment circuit counts
Multiple connector interface type and location options
Variety of configurations available to complement existing network designs
Preinstalled cable management bars
Reduces cable congestion and simplifies maintenance
Cable management rings with labeling
Ensures proper cable routing and circuit identification
Reversible mounting brackets
Each panel fits into 19" or 23-inch racks, or can be wall mounted
Support signal rates up to E1 (2.048 Mbps)
Impedance Matching Bay in Network
18
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3/08 • 102964AE
Termination and Access Products

Wired Assemblies
Introduction
In the central office, wired assembly jackfields,
inserted into VF circuits between different office
equipment, provide jack access for testing and
rerouting (patching) circuits.
Pioneered by ADC, these jackfields with bantam
jacks are available in a prewired, prewired
and connectorized, or connectorized only
configuration; and completely assembled in our
plant. No need for expensive wiring connections
in the field. ADC bantam jackfields are available
in virtually any circuit configuration required.
Included are 2-wire, 4-wire, and 6-wire circuits
for primary, secondary, intermediate, test and
out-of-service functions. Equally important, each
jackfield is checked, inspected and tested in
our plant.
See pages 37-48 for Specifications
JC6/48M